Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM40692
Volume:
9 |
1 |
Jan 2025
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The mini hydro turbine research is aimed at designing and constructing a hydro-electric power plant model that can generate electric power, which can be used at the domestic level to power electrical appliances. There are three main sections for the hydro turbine, such as the pelton wheel which rotate due to falling water from the water storage tank through the penstock, the alternator, been made of a permanent magnet rotor and conducting coil windings on the stator connected to the turbine through a runner, and the feedback system for the continuous flow of water. The result shows that the construction of mini hydro turbine plant is feasible and there were no major problems apparent at the design and implementation stages of the mini hydro turbine power plant.
KEYWORDS
Publication Date
10/31/2025
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
4
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...