Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM46194
Volume:
9 |
4 |
Apr 2025
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The system consists of an MQ2 gas sensor connected to an ESP8266 (NodeMCU) microcontroller, which detects gas leakages by sending alerts to users through the Blynk IoT platform. The ESP8266 performs Wi-Fi connection after start-up, then proceeds to read gas levels through its analog input. The sensor value is read by the system once every 2 seconds before it sends the data to the Blynk application. When gas concentration surpasses the set limit, the system creates an alert that switches off the LED light and activates the relay or motor equivalent to an exhaust fan or buzzer and sends immediate notifications to users through Blynk. When the gas measurement shows safety, the system activates the LED light while keeping the motor powered down. Remote monitoring occurs indefinitely because this configuration allows instant notification of gas leaks.
KEYWORDS
Publication Date
4/27/2025
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
0
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...