Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM18260
Volume:
7 |
3 |
Mar 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Fire is one of mankind’s greatest discoveries but can also be a great source of danger in accidents. Fire in any occupancy has the potential to cause harm to its occupants and severe damage to the property. As a solution a smart fire detection system is designed using GSM technology, smoke/Flame sensors, and Arduino technology, water sprinkler system, LCD display, buzzer,. A smoke sensor is used to detect the smoke from the fire and Flame sensor. In a event of a The microcontroller is used to process the sensor circuitry input, and also used to turn on the LCD, exhaust fan, water pump motor and the main supply switch will be switched off (switch open). It turns on the GSM modem after that, it continues to send SMS to mobile number for alerting danger to the people. This system helps users to respond immediately to the situation and so improve their safety by protecting their lives and the properties from fire hazards.
KEYWORDS
Publication Date
3/22/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...