Agriculture equipment 3 in 1: CASE STUDY

Agriculture equipment 3 in 1: CASE STUDY

#1 M .P.Palsakar, #2 Gadhak Harshal Arun , #3  Borde Tejas Laxman#4 Bhagwat Rameshwar Babasaheb

#1 Sr. lecturer, #2 Student, #3Student, #4 Student

Mechanical Engineering, Sanjivani K.B.P.Polytechnic, Kopargaon, MS,

#1dapatilme@sanjivani.org.in, #2harshalagadakh1234@gmail.com#3tejasborde0709@gmail.com

#4 bhagwatrameshwar25@gmail.com

Abstract

We are developing agriculture three in a new RND mechanical project. This project provides farmers with three needs solution cropping, spraying, dust ring. Short explanation of each We part as follows.

Agriculture Duster We have developed an agriculture duster of a new RND mechanical project. It is a common type of duster being used by farmers. The duster consists of a hopper, fan/blower, rigid/flexible discharge pipe, reduction gearbox, rotating shaft to connect motor, and metering mechanism. The duster has a mechanical agitator connected to the gearbox placed in the motor, which chums the chemical and prevents clogging of the outlet. The adjustable orifice plate mounted below the hopper outlet controls the application rate. For operation, the hopper is filled 1/2 to 3/4th of the capacity of the hopper. This is mounted on the framework with the help of adjustable straps. The discharge pipe fitted with spoon type deflector is directed towards the target continuously rotating the switch on motor. The chemical in dust/powder form drops from the hopper in the discharge pipe having an air stream created by the blower. These dust particles emerging in the forms of cloud from the discharge pipe are carried to the plant where these settle on the leaves, stems and other parts. –are developing agriculture three in a new RND mechanical project. This project provides farmers with three needs solution cropping, spraying, dust ring. Short explanation of each We part as follows.