Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM12850
Volume:
6 |
5 |
May 2022
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Plastic wastes are being major reason for solid waste disposal. As the plastic is non-biodegradable and cost effective materials with high strength are in great demand by construction industries. This Study deals with the possibility of using waste plastic as fiber in concrete by replacing 0.5%, 1% & 1.5% by weight of cement. The test specimens are made in the form of Cube, Cylinder and Prism. Compression, Split Tensile and Flexural test is carried out to find the strength of concrete. The studies will conduct on a M25 mix and investigation process will be carried out as per recommended procedures by relevant codes. Finally, the obtained results using FRC are compared with conventional concrete.
KEYWORDS
Publication Date
8/4/2022
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
3
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...