Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM12242
Volume:
6 |
4 |
Apr 2022
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The Exhaust system is an integral part of the vehicle. To remove the waste gases from the vehicle it came in existence. The performance of engine is mainly affected by exhaust manifold and gasket used because they directly affect the engine stability and control. Generation of back pressure and thermal load restrict to achieve desirable requirement. The protection of the exhaust system from internal and external factors it is necessary to optimize the design of exhaust manifold and gasket because development of crack is more in these two parts. A gasket is designed in this project. For 3D modeling of gasket Creo 4.0 is used and with the help of ANSYS 17.1 the analysis has performed.
KEYWORDS
Publication Date
11/3/2022
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...