AN REVIEW OF THE SYMMETRICAL MULTILEVEL INVERTER TOPOLOGY FOR SOLAR SYSTEMS WITH MINIMAL SWITCHING

AN REVIEW OF THE SYMMETRICAL MULTILEVEL INVERTER TOPOLOGY FOR SOLAR SYSTEMS WITH MINIMAL SWITCHING

ANUKRETI DUBEY¹, DR. DURGA SHARMA², MR. AMIT AGRAWAL³

MtechScholar¹,HOD², Professor³

Dept of Electrical engineering, DR. CV Raman university Kota Bilaspur(C.G)

Abstract: The energy supply for the multilevel inverter is a chain combination of three PV arrays. In this paper, we compare the outputs of a 3-segment bridge inverter and a 7-stage multilevel inverter for the entry of a PV device. Here, cases are considered. In the first case, PV module output is carried out by a three-section full-bridge inverter. In the second case, PV module output is carried out by a symmetrical seven-stage inverter. The greater the variety of PV modules, the greater the range of voltage degrees, the more trustworthy the output sinusoidal waveform is. Multi-stage inverters (MLI) are being preferred over traditional two-degree inverters as the former topologies have minimal harmonic distortion, electromagnetic interference, and higher DC hyperlink voltages. On the other hand, these gadgets have a few inherent drawbacks, like an expanded number of switches, complex manipulative strategies, and the requirement of many voltage sources. A conventional topology uses 12 switches for a 7-stage MLI layout.

Keywords: Symmetrical, multilevel inverter, photovoltaic system, review