Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM18578
Volume:
7 |
4 |
Apr 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The main objective of this project is to represent the various design implementation using the software ANSYS HFSS. The FR4 epoxy microwave dielectric board ( = 4.4 tan = 0.02) is used to design and construct the prototype. The antenna parameters such as Gain, Radiation Pattern, and Polar Plot, as well as the performance of the designed antenna is also included in this study. The left side antenna frequency range (9.01GHz-10.51GHz) and center frequency range 9.8GHz and right side of the frequency range(9.51GHz-10GHz) and center frequency range 9.7GHz, making it ideal for a variety of applications including satellite communication, medical applications, and other wireless systems. This software designed in the ANSYS and simulation is carried out using high frequency simulation structure (HFSS) program. The entire project revolves around the development of a X band patch antenna for remote sensing satellite application.
KEYWORDS
Publication Date
4/3/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
4
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...