Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM40809
Volume:
9 |
1 |
Jan 2025
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Geo polymer is considered as the third-generation cement after lime and ordinary Portland cement. Light weight geo polymer concrete is produced when for foaming agent is added to slurry, the function of foam is to create an air voids in fly ash–based geo polymer slurry. In this investigation of Light weight geo polymer concrete mixtures are produced foaming agent like aluminum powder with 0.5%,1.0%, 1.5% and 2.0% with Geo Polymer concrete and 15 Cube specimens are prepared and tested for mixtures of M30 mix as used in conventional concrete for Geo Polymer concrete ,then their physical (Density and workability) as well as specific structural (Compressive Strength) properties were investigated, Specific Strength and Percentage Strength gain for aerated concrete is compared with normal weight concrete and the results are reported.
KEYWORDS
Publication Date
1/17/2025
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
2
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...