Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM16449
Volume:
6 |
9 |
Sep 2022
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Transmission line towers and monopoles. Transmission line towers and monopoles are often used for high steel structures used for electric transmission. The transmission line tower or monopole should be carefully planned so that they won’t fail over their whole lifespan and should be followed both nationally and internationally. This paper describes the transmission tower for different spans, such as 3m, 5m, 7m, and 9m, and with 3 types of bracing systems (K, X, and K & X). Comparing each brace with each other and observing the displacement of each tower to bring out the best self-supporting and most economical transmission tower based on the displacement values. The results show that displacement was observed to be high in K-bracing and low in K & X bracing combined.
KEYWORDS
Publication Date
9/29/2022
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
11
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...