Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM44914
Volume:
|
|
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The design and implementation of an automated liquid observation was analyzed in this paper. The PIC Micro controller platform has been used as controlling unit for providing necessary control along with a 3×4 matrix keypad. Bluetooth module is used to control the drop per minute manually and by using an android phone. The designed flow sensor will be hooked up to the drip chamber of the saline container to determine the saline flow rate as well as an accurate number of a drop of the saline. The obtained outputs from the sensor are continuously checked with the given command and if any mismatch is found.The micro controller moves the motor control to modify the circulation rate to balance with assigned command. This setup allows healthcare providers to remotely monitor and control the saline flow rate, ensuring accurate and consistent delivery of fluids to patients
KEYWORDS
Publication Date
4/19/2025
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
0
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...