Automatic Water Level Controller Device

Automatic Water Level Control is a project that has been purpose to maintain the water at the certain level. The project has two actuator to control the water, which are pump and valve. The pump draws water to the tank and the valve can enable or disable the outflow from the tank. When the water is higher from the actual level, the valve will automatically on and the water will decrease to the actual level. But when the water is less than the actual level, the valve will off and the pump will draws the water until reach the level. This project uses the PLC as the controller to control the water in and water out. The CX-programmer software in PLC is used to draw the ladder diagram. The instruction such as jump, counter, timer, compare will be used in this system to function the water level control hardware. The Flash Software will be used to display the anime of water flow in the tank controlled by motor and valve.