Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM16032
Volume:
6 |
8 |
Aug 2022
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The aim is to design and develop a control system based an electronically controlled automatic brake failure indicator and engine over heating alarm by using heat sensor is called “BRAKE FAILURE INDICATOR AND ENGINE OVER HEATING ALARM”. Automatic brake failure indicator and engine over heating alarm is consists of Arduino Uno circuit, Heat sensor, Control Unit and frame. The sensor is used to detect the Heat of the Engine. There is any disconnection of the brake wire or cutting of any few turns of brake wire, the control signal to the alarm unit. Similarly the heat sensor is fixed to the engine and this heat is measured and giving the alarm signal when the engine heat exceeds the setted temperature limit.
KEYWORDS
Publication Date
10/7/2022
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...