Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM32025
Volume:
8 |
4 |
Apr 2024
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
CFD analysis of dimple, corrugated and plain tube is done in this study. Here, voltage is varying from 60-100 v. There is wide increase in heat transfer from corrugated tube after 80 Volts. Hence, we have high heat transfer in the corrugated tube at higher voltages. Also, We use dimple tube in this study and we try to find out the heat transfer coefficient of dimple tube and corrugated tube and plane tube. we use natural convection set up for this study and we find out Corrugated tube shows good results as compared to other tubes. Also, CFD of dimple is done by using ANSYS fluent.
KEYWORDS
Publication Date
12/31/45408
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
2
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...