Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM69032
Volume:
10 |
11 |
Nov 2026
Pages:
1-8
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.

Electronics and communication
Aditya College of Engineering and Technology

Electronics and communication
Aditya College of Engineering and Technology

Electronics and communication
Aditya College of Engineering and Technology

Electronics and communication
Aditya College of Engineering and Technology

Electronics and communication
Aditya College of Engineering and Technology
Coal mining is an essential industrial activity; however, underground mining operations involve several environmental hazards that pose significant risks to the health and safety of workers. Factors such as abnormal temperature and humidity, poor air quality, smoke, fire outbreaks, and other hazardous environmental conditions can lead to serious accidents and loss of human life. Therefore, continuous monitoring of underground mine conditions and the timely generation of warning signals are essential for improving workplace safety. This project presents the design and development of an ESP32-Based Coal Mine Safety Monitoring and Alert System that monitors critical environmental parameters and provides immediate alerts when abnormal conditions are detected. The proposed system integrates a DHT11 sensor to measure temperature and humidity, a soil-moisture sensor to monitor moisture levels, an MQ135 sensor to detect changes in air quality and smoke concentration, a flame sensor to identify fire conditions, and a digital-output LDR module to determine day and night conditions. A 16×2 I²C LCD is used to display real-time sensor information and system status. An audible buzzer provides local warnings whenever configured hazardous conditions are detected. Additionally, two relay modules are incorporated into the system: Relay 1 operates according to the LDR-based day and night detection, switching ON during nighttime and OFF during daytime, while Relay 2 is activated when the MQ135 sensor reading exceeds its predefined threshold. To enable remote supervision, the system uses Wi-Fi connectivity to transmit event-based notifications through the Telegram application and upload selected sensor data to the ThingSpeak IoT platform.
KEYWORDS
This research presents the design and development of an ESP32-based monitoring prototype that combines embedded systems and Internet of Things (IoT) technology for observing environmental conditions. The developed model utilizes multiple sensor modules to collect environmental information, which is processed by the ESP32 controller to identify conditions that satisfy predefined alarm criteria. The monitoring arrangement covers temperature, relative humidity, moisture variations, air-quality responses, flame indications, and surrounding light conditions. For effective system operation, a 16×2 LCD is incorporated to display the acquired sensor information, while an audible buzzer provides local warnings when programmed abnormal conditions are identified. In addition, two relay channels perform independent switching operations based on the LDR and MQ135 sensor readings. The wireless communication facility of the ESP32 further enables the transmission of event-related messages through Telegram and the uploading of selected sensor data to ThingSpeak for remote access and graphical analysis. The experimental model illustrates how different sensing devices, automatic control functions, and internet-based communication facilities can be combined into a compact and economical monitoring platform. Its modular configuration also provides scope for incorporating advanced sensing technologies, improved communication mechanisms, and additional monitoring facilities in subsequent developments. Despite these capabilities, the developed model has certain limitations concerning its suitability for actual underground mining operations. The implemented hardware and sensing modules are intended for educational and experimental purposes and have not undergone certification for mine-safety applications. Consequently, their measurements and warning functions cannot be considered a substitute for approved industrial protection systems. Any future implementation in an operational mine would require detailed safety assessment, calibrated gas-detection instruments, certified intrinsically safe components, rigorous testing, and adherence to the applicable mining regulations. In conclusion, the proposed prototype provides a practical foundation for exploring IoT-enabled environmental monitoring and automated alert generation. Further research and engineering improvements are necessary before such a system could be considered for use in real underground mining environments.
[1] Espressif Systems, ESP32 Series Datasheet. Espressif Systems. Available: https://www.espressif.com/ [2] Adafruit Industries, DHT Sensor Library for Arduino: Documentation and Examples.Available: https://github.com/adafruit/DHT-sensor-library [3] MathWorks, ThingSpeak Documentation: Channels, Fields, and Write API. Available: https://www.mathworks.com/help/thingspeak/ [4] Telegram, Telegram Bot API Documentation.Available: https://core.telegram.org/bots/api [5] Zhengzhou Winsen Electronics Technology Co., Ltd., MQ135 Air Quality Gas Sensor Datasheet. Available: https://www.winsen-sensor.com/ [6] Manufacturer of the LDR Module, LDR Light Sensor Module Datasheet and Technical Documentation. [7] Manufacturer of the Flame Sensor Module, Flame Detection Sensor Datasheet and Operating Manual. [8] Manufacturer of the Soil-Moisture Sensor Module, Soil Moisture Sensor Technical Datasheet. [9] Manufacturer of the Two-Channel Relay Module, Relay Module Datasheet and Operating Instructions. [10] Zheng, K., et al. (2016). Big data processing architecture for IoT applications in smart cities. IEEE Access.
Publication Date
11/16/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
2
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...