Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM30613
Volume:
8 |
4 |
Apr 2024
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Bubble beam is a beam whose core is replace with Spherical balls that can be of various sizes and shapes. Usually the Bubble Deck system combines the benefits of factory manufactured elements in controlled conditions along with on-site completion. Some of its major benefits are lower total cost, reduced material use, enhanced structural efficiency, decreased construction time, and is a green technology. In this project the in-effective concrete in the Centre of the beam is replaced with High density polyethylene hollow spheres, using M20 grade of concrete no of beams with and without spherical bubbles were casted to compare weight and flexural strength.
KEYWORDS
Publication Date
12/31/45393
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...