Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM31736
Volume:
8 |
4 |
Apr 2024
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Internet of Things (IoT) can be used to monitor health conditions of patients after major surgeries. Information from various sensors is processed by PIC16F877A microcontroller which sends data to GSM Network with the help of IoT module. A relay is used to switch between IoT module and GSM module based on the output voltage of the sensors. The data transmitted from the microcontroller is stored on the cloud for long term storage and access. The address of the webpage used should be configured in the IoT module. Alert signal is sent to caretaker in case of emergency. This system is easy to setup with low power consumption and high performance. This system uses GSM network so can be used even in rural areas where broadband facility is not available.
KEYWORDS
Publication Date
12/31/45407
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...