Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68334
Volume:
10 |
10 |
Oct 2026
Pages:
1-7
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.

Electronics & Tele-Communication Engineering
JSPM's Bhivrabai Sawant Polytechnic,Wagholi,Pune

Electronics & Tele-Communication Engineering
JSPM's Bhivrabai Sawant Polytechnic,Wagholi,Pune

Electronics & Tele-Communication Engineering
JSPM's Bhivrabai Sawant Polytechnic,Wagholi,Pune

Electronics & Tele-Communication Engineering
JSPM's Bhivrabai Sawant Polytechnic,Wagholi,Pune
Electronics & Tele-Communication Engineering
JSPM's Bhivrabai Sawant Polytechnic,Wagholi,Pune
Temperature monitoring is an important part of many electronic, industrial, environmental, and healthcare applications. Traditional thermometers may require manual observation, while digital temperature monitoring systems can provide electronic readings that are easy to observe and record. This paper presents a proposed Arduino-based digital temperature monitoring system using a temperature sensor. The proposed system consists of an Arduino Uno microcontroller board, an LM35 temperature sensor, and a display interface. The LM35 sensor measures the surrounding temperature and produces an analog voltage proportional to the temperature. The Arduino reads this voltage through its analog input, converts the sensor reading into a temperature value, and displays the result in degrees Celsius through the Serial Monitor or an optional LCD display. The system is designed to provide a simple, low-cost, and easy-to-understand method of temperature measurement. It demonstrates the application of embedded systems, sensor interfacing, analog-to-digital conversion, and microcontroller-based data processing. The proposed design can be used for educational purposes and can be extended for environmental monitoring and other temperature-sensing applications. Practical implementation and experimental testing are required to evaluate the accuracy, response time, and reliability of the system.
KEYWORDS
The proposed Arduino-Based Digital Temperature Monitoring System demonstrates a simple method of measuring and displaying temperature using an LM35 sensor and an Arduino Uno microcontroller. The sensor converts temperature into an analog voltage, while the Arduino reads the signal, calculates the temperature in degrees Celsius, and displays the result through the Serial Monitor or an optional LCD. The design provides a practical introduction to embedded systems, analog sensor interfacing, analog-to-digital conversion, and microcontroller programming. Its simple architecture and commonly available components make it suitable for educational demonstrations and basic temperature-monitoring applications. The system can be extended with wireless communication, IoT connectivity, data logging, and automatic alerts. However, its measurement accuracy and practical usefulness must be established through suitable testing and calibration. The proposed system provides a foundation for understanding and developing more advanced temperature-monitoring applications.
1) Arduino, “Arduino UNO Rev3,” Arduino Official Documentation. Available: https://docs.arduino.cc/hardware/uno-rev3/ 2) Arduino, “Arduino Language Reference,” Arduino Official Documentation. Available: https://docs.arduino.cc/language-reference/ 3) Texas Instruments, “LM35 Precision Centigrade Temperature Sensors,” LM35 product documentation and datasheet. Available: https://www.ti.com/product/LM35 4) Arduino, “Arduino IDE,” Arduino Official Documentation. Available: https://docs.arduino.cc/software/ide/ 5) M. A. Mazidi, S. Naimi, and S. Naimi, The AVR Microcontroller and Embedded Systems: Using Assembly and C. Pearson. 6) A. S. Sedra and K. C. Smith, Microelectronic Circuits. Oxford University Press. Relevant research articles on temperature sensing, microcontroller-based monitoring, and embedded measurement systems should be selected and verified from the original publications before submission
Publication Date
10/26/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
1
Total views since publication
PDF Downloads
4
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...