Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM24531
Volume:
7 |
7 |
Jul 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The aim of the present work is to carry out the free surface flow in a Pelton turbine bucket. Steady state numerical simulation has been done for the single bucket, for this the fixed configuration of Pelton turbine bucket is considered. The dimensions of the bucket are to be varied for the same conditions of discharge, head, and inclination of bucket to the jet. The numerical analysis is performed with the FLUENT code. The results provided by the analysis are compared for two profiles of Pelton buckets. The flow patterns in the buckets are analyzed from the results. An analysis of the losses due to the edge and the cutout of the bucket is also done. These results give the details as per expectation of steady flow calculations through the optimization process of the design of Pelton turbines.
KEYWORDS
Publication Date
11/6/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
3
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...