Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM25964
Volume:
7 |
10 |
Oct 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
In order to keep up with the evolving technology, there’s a growing need for communication antennas with higher bandwidth. One major solution for this demand is 5G technology. To address this, we’ve developed a 3.45GHz antenna. The antenna is constructed using FR4 material, a double-sided copper-coated PCB with a dielectric constant of 4.4 and a substrate height of 1.6mm. Our initial design involved simulating the antenna in Advanced Design System (ADS) and generating graphs for gain, directivity, frequency plot, radiation pattern, Electric field plane, and Magnetic field. Additionally, we utilized ADS software to create the equivalent circuit diagram and conducted simulations to calculate the S-parameters.
KEYWORDS
Publication Date
5/9/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...