DESIGN AND ANALYSIS OF PRESSURE VESSEL USING DIFFERENT MATERIALS

DESIGN AND ANALYSIS OF PRESSURE VESSEL USING DIFFERENT MATERIALS

1K.Abhinash,Assistant Professor, Department of Mechanical Engineering N.S.R.I.T(A),Visakhapatnam Andhra pradesh, India

2 A.Nithin Varma, M.Jogesh.,P. Giridhar, T.Rajesh , B.Tech Students, Department of Mechanical Engineering N.S.R.I.T(A) ,Visakhapatnam, Andhra pradesh, India
220nu1a0301@nsrit.edu.in,20nu1a0328@nsrit.edu.in,20nu1a0348@nsrit.edu.in,21nu5a0315@nsrit.edu.in
1abhinash.me@nsrit.edu.in

ABSTRACT

This project explores the field of Finite Element Analysis (FEA) in relation to pressure vessels that have different head configurations, while ensuring that the cylindrical volume and thickness remain uniform. The project adheres to ASME standards, specifically Section VIII, Division I, and focuses on designing a pressure vessel that can withstand a pressure of 8 bar within a volume of 24 liters. The main objective of using FEA is to identify areas of stress concentration in each head design. In industrial settings, pressure vessels play a crucial role in containing fluids or gases under varying pressures. The choice of head configuration significantly impacts the distribution of stress and the overall structural strength. This project specifically utilizes ANSYS software for static and thermal analyses to compare stress distribution in pressure vessels with flat heads, elliptical heads, and other common head designs. The goal is to identify configurations that exhibit lower stress levels, with a particular emphasis on practical scenarios that favor elliptical heads. Additionally, the project explores finite element modeling techniques to evaluate pressure vessels made from different materials such as Nimonic 80A and SA516 Gr70 under high-stress conditions