Stream/Area:
-
Subject:
-
Paper ID:
IJSREM69045
Volume:
10 |
11 |
Nov 2026
Pages:
1-11
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.

Electronics and Communication Engineering
Aditya College of Engineering and Technolgy
Electronics and Communication Engineering
Aditya College of Engineering and Technolgy
This paper describes the development of a smartphone-operated door locking arrangement based on Bluetooth communication and an embedded controller. The proposed prototype brings together a mobile application, a Bluetooth interface, a microcontroller, a driver stage, and an electronic locking unit. Through the application, a user can issue commands to lock or unlock the door without making a direct wired connection to the controller. After a command reaches the controller, the embedded program interprets the received data and produces the output needed to operate the locking device through an appropriate driver circuit. The work is intended to provide a straightforward and economical alternative to a conventional key-operated arrangement for small access-controlled spaces. The mobile phone acts as the command interface, while the controller coordinates communication and lock operation. The hardware arrangement can be implemented with an ESP32 board or another suitable controller paired with a compatible Bluetooth interface. The final selection of the electronic lock and driver depends on their electrical ratings and the requirements of the prototype. The paper outlines the system structure, component requirements, software approach, communication sequence, and method used to evaluate the prototype. Particular attention is given to pairing the phone with the controller, receiving and interpreting commands, and producing a consistent response from the locking mechanism. Factors such as usable communication distance, supply stability, interface compatibility, and response behaviour are relevant when assessing the design. The prototype may be examined through functional checks that include device pairing, command delivery, connection continuity, and correct lock and unlock responses. Since Bluetooth is a short-range technology, its practical performance depends on the selected interface and the surrounding environment. Access protection must also be considered: pairing alone should not be treated as complete security, and the design should accept only recognised commands. The proposed arrangement demonstrates the use of embedded control and local wireless communication for convenient electronic access management.
KEYWORDS
The project presents a smartphone-controlled door-locking arrangement based on Bluetooth communication and embedded control. It demonstrates how a mobile device can send a local command to a microcontroller and how the controller can operate an electronic locking mechanism through an appropriate driver circuit. The design provides an alternative way to request locking and unlocking without relying on a conventional key for each operation. The proposed system is based on a relatively simple set of functional blocks: a smartphone application, Bluetooth communication interface, microcontroller, driver stage, electronic lock, and power supply. Using commonly available components makes the arrangement suitable for academic demonstration and further experimentation. The ESP32 platform is one possible controller choice because Bluetooth capability is available in the device family, although the exact board and lock must be selected to meet the project requirements. The practical value of the prototype depends on correct pairing, reliable command reception, proper processing of the received data, and safe operation of the locking unit. Its security is also influenced by how authorised devices are managed and how invalid commands are handled. Bluetooth range, radio interference, power stability, and hardware compatibility are additional factors that affect dependable operation. The design may be extended by adding stronger user verification, a door-position sensor, event logging, backup power, or notification features. Wi-Fi or Internet of Things connectivity could also be explored where remote monitoring is required. Emergency manual access should be considered in any practical door-lock installation so that the system remains usable if power or communication becomes unavailable. In summary, the Bluetooth-based smart door lock demonstrates the integration of wireless communication and microcontroller technology in an electronic access-control application. It provides a foundation for further work on smart-home automation and intelligent locking systems, while highlighting the need for appropriate testing and security design.
[1] Espressif Systems, “ESP32 Series Datasheet,” Espressif Systems. Available: ESP32 Datasheet. [2] Espressif Systems, “ESP32 Arduino Core Documentation.” Available: Arduino ESP32 Documentation. [3] Espressif Systems, “ESP32 Bluetooth Networking User Guide.” Available: ESP32 Bluetooth Resources. [4] IEEE, “Modernizing Home Protection: An IoT-Driven Approach with Smart Lock and Android Application,” 2024 IEEE 14th International Conference on Control System, Computing and Engineering, DOI: 10.1109/ICCSCE61582.2024.10696484. [5] Bluetooth SIG, “Bluetooth Core Specification.” Available: Bluetooth Official Specifications. [6] Arduino, “Arduino Documentation and Programming Environment.” Available: Arduino Official Documentation.
Publication Date
11/18/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
0
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
Funding Agency: ARCHANA L
Grant / Project ID: 8660460156
Related research in the same subject area
Loading similar articles...