Design And Development Of Savonius Hydro – Kinetic Turbine

While concluding this report, we feel quite fulfill in having completed the project assignment well on time, we had enormous practical experience on fulfillment of the manufacturing schedules of the working project model. We are therefore, happy to state that the in calculation of mechanical aptitude proved to be a very useful purpose. Although the design criterions imposed challenging problems which, however were overcome by us due to availability of good reference books. The selection of choice raw materials helped us in machining of the various components to very close tolerance and thereby minimizing the level of balancing problem. Needless to emphasis here that we had lift no stone unturned in our potential efforts during machining, fabrication and assembly work of the project model to our entire satisfaction. Here the project model will capable to produce power 2-3watt per sec. The model develops by us fulfill the required objectives that it will produce near about 3 watt power & hence we are satisfied with our project work.

[1]  Imron Hamzah, Ari Prasetyo, D. D. D. Prija Tjahjana, Syamsul Hadi, Effect of Blades Number to Performance of Savonius Water Turbine in Water Pipe, The 3rd International Conference on Industrial, Mechanical, Electrical, and Chemical Engineering, AIP Conf. Proc. 1931, 030046-1–030046-4;pp.1-5. [2]  Ibrahim Mabrouki, Zied Driss, Mohamed Salah Abid, Performance Analysis of aWater Savonius Rotor: Effect of the Internal Overlap, Sustainable Energy, 2014, Vol. 2, No. 4, 121-125 Available online at http://pubs.sciepub.com/rse/2/4/1 © Science and Education Publishing DOI:10.12691/rse-2-4-1 [3]  Dandun Mahesa Prabowoputra, Syamsul Hadi, Jung Min Sohn, and Aditya Rio Prabowo, Research Article- The effect of multi-stage modification on the performance of Savonius water turbines under the horizontal axis condition, Open Eng. 2020; 10: pp..793–803.   [4]  H. Elbatrana, Mohamed Walid Abdel-Hameda, O. B. Yaakobb,c, Yasser M. Ahmed, M. Arif Ismail Hydro Power and Turbine Systems, Reviews Jurnal Teknologi ,74:5 (2015) 83–90 | www.jurnalteknologi.utm.my | eISSN 2180–3722 |,pp.83-90.   [5]  Golecha Kailash, T. I. Eldho, and S. V. Prabhu, ,Research Article- Performance Study of Modified SavoniusWater Turbine with Two Deflector Plates, Hindawi Publishing Corporation, International Journal of Rotating Machinery, Volume 2012, Article ID 679247,pp.1-13.   [6]  Anuj Kumar a, Gaurav Saini, Flow field and performance study of Savonius water turbine, Materials Today: Proceedings Contents lists available at Science Direct August 2020, pp.1-5.   [7]  Bagus Wahyudi, Wirawan , Sarjiyana , Moh. Hartono , Satworo Adiwidodo,The Experimental Study of Hydrokinetic Cross Flow Savonius Horizontal Axis Turbine (CROSSHAT TURBINE),International Journal of Mechanical Engineering and Robotics Research Vol. 8, No. 6, November 2019, ,pp.966-971.   [8]  Armand Z. Anthony and Sukanta, Performance analysis of a modified Savonius hydrokinetic turbine blade for rural application Roy,2nd International Conference on Materials Technology and Energy IOP Conf. Series: Materials Science and Engineering 943 (2020) 012034,pp.1-11.