Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM12845
Volume:
6 |
5 |
May 2022
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
In this project, we will be doing Design, Analysis & Manufacturing automation for circular parts welding with uniform weld structure using PLC. We will be designing & manufacturing the turntable, which will be rotating at specific required speed de-pending upon the requirement of fillet material to be added. Further, the electrode nozzle is kept stationary, which will be in contact with the surface of components to be welded. Hence, in this project, a detailed design for converting the convention-al MIG welding (ARC) machine into an automated circular component-welding machine has been proposed. Along with this main modification the existing MIG welding machine – (a stationary downward ARG – HEAD which has provisions for hor-izontal and upward movements) is to be modified into portable robotic welding machine.
KEYWORDS
Publication Date
8/4/2022
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
3
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...