DESIGN AND FABRICATION OF 360 ° AIR COOLER AND HEATER

DESIGN AND FABRICATION OF 360 ° AIR COOLER AND HEATER

Prof. Anuprita Tikle¹,  Rupesh Deshmukh², Tanmay Dhas³, Eshwar Sarode⁴, Mayur Sawant⁵.

1 Asst.Professor Department of Mechanical Engineering, Airoli,

2,3,4,5B.E. Students Department of Mechanical Engineering,

 Datta Meghe College of Engineering, Airoli.

---------------------------------------------------------------------***---------------------------------------------------------------------

Abstract –

To develop the energy efficient, environment friendly direct evaporative air conditioning and forced heating system having low operating cost suitable for hot and dry regions and climates. To manufacture advanced 360-degree rotating air cooler& heater which rotates and provide air cooling and heating in all directions.360-degree design air cooler& heater will allow person to sit in any direction during winter for heater and cooler for summer. Simple 360- degree evaporative cooling is achieved by direct contact of water particles & a moving air stream. When a hot and dry air is allowed to pass through a wet cooling pad, the temperature of incoming air is reduced with an increase in specific humidity as some water from the pad is evaporated taking the latent heat of vaporization from the incoming air.360-degree heater, is forced convective heater that has an electric fan to speed up the air flow

Key Words: Evaporative, 360° air cooler and heater, vaporization, thermal conduction, heating and cooling, low operating cost.