DESIGN AND FABRICATION OF COOLANT MIXING SYSTEM

DESIGN AND FABRICATION OF COOLANT MIXING SYSTEM

Nikhil Rane*1, Tanvi Ahire *2, Rushikesh Pardeshi *3, Sahil Talpade *4, Sarika lugde *5 Department of Mechanical Engineering DATTA MEGHE COLLEGE OF ENGINEERING, AIROLI, MAHARASHRA, INDIA

Professor , Faculty of Mechanical Engineering, DATTA MEGHE COLLEGE OF ENGINEERING

ABSTRACT
In today's competitive world of the industrial sector the load on machines and machine operation has increased, which increases the need for coolant. Coolant is a liquid medium which is used to cool the workpiece when it gets heated during machining operation. There are certain ways of making a coolant which is favorable to different types of work piece operations. Before selection of this project topic, we found the flaws in industries operation in terms of usage of cutting fluid in improper proportion, which affected the quality of the final product. These flaws and lack of quality of product can be avoided by use of a machine system named “COOLENT MIXING MACHINE”. The working principle of this machine is based on mixing water and cutting fluid in proper proportion. In our case the proportion taken is 1:20 i.e. 1L of cutting fluid, 20 L of water. By implementing the system, the flaws and lack of quality of final product can be bettered

Keywords: Coolant, Cutting fluid, Water proportion 1:20, “COOLANT MIXING MACHINE”