Design and Fabrication of Gearless Transmission System Using Elbow Mechanism

This project “GEARLESS TRANSMISION USING ELBOW MECHANISM” can be a small and lightweight piece of equipment that is capable of transmitting power at various angles without the use of gears. The El-bow Mechanism transfers input power to the output side in such a way that the angular forces generated in the slacks are transmitted with the aid of rods that absorb the input power and pass the right angle drive to the output slack and rod assembly. As a result, it is recognized that gearless transmission mechanisms can achieve efficiencies of up to 92 percent. For transmitting rotational velocity from an input connected to three bent ties, a gearless transmission is given. The input shaft’s rotational axis is angled in relation to the housing’s rotational axis at various angles. As a consequence, rotation of the input shaft causes the bent link’s axis to move in a processional motion. The bent link’s rotary and reciprocating motion transmits the prime mover’s rotation to a variable angle without the use of a gear system to an output shaft.