Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM14798
Volume:
6 |
6 |
Jun 2022
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
In this research we have discussed about micropatch antenna. The antenna is fabricated on 17.6 x 44 x 1.6mm substrate. High frequency structure simulator (HFSS) is used to design and simulate the antenna. FR-4 epoxy dielectric substance is used with dielectric constant of 4.4. After simulation we have found the necessary parameters of antenna like return loss, VSWR, bandwidth and input impedance which is -15db, 1.4, 200MHz and 50Ω respectively. This antenna operates at the frequency of 2.4GHz which is suitable for Industrial, Scientific ,Medical (ISM band) applications.
KEYWORDS
Publication Date
6/19/2022
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
14
Total views since publication
PDF Downloads
2
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...