DESIGN AND FABRICATION OF SOLAR 360 AIRCOOLER CUM HEATER

In our project, solar power is captured and stored in a battery. This power is used to run the air cooler whenever required. Solar energy means the radiation energy that reaches the earth from the sun. It provides daylight makes the earth hot and is the source of energy for plants to grow. Solar electric systems are suitable for plenty of sun and are ideal when there is no main electricity. Solar electricity is the technology of converting sunlight directly in to electricity. It is based on photo-voltaic or solar modules, which are very reliable and do not require any fuel. The idea is to produce a “DESIGN & FABRICATION OF SOLAR 360 AIR COOLER CUM HEATER” that changes from its maximum temperature to its minimum temperature by simply adjusting a simply operated switching button. This type of equipment can find wide variety in medicinal, food and beverage transport commercially and for domestic purposes. Travellers can make the better use of it. The main objective of our project is to design and analyse a heating and cooling system that uses a non-conventional energy source (i.e., solar power). It will be a suitable and economical system for people living in remote areas of India where load shedding is a major problem. The main difference between our system and existing system is that our project works without heavy mechanical devices and also without refrigerant. As the module is compact in size, one can design the system as per his requirement (i.e., size, capacity).