DESIGN AND FABRICATION OF WATER LIFTING BY SEE SAW MECHANISM

This is an updated and expanded new edition (formerly Water Pumping Devices), surveying the water-lifting technologies that are available and appropriate for smallholdings. It examines the costs and general suitability of the different technologies to enable farmers and policy makers to make informed choices.More than one billion people still do not have access to safe drinking water, and almost two billion people suffer from diseases arising from contaminated water due to poor sanitation. Irrigation is essential for the basic food requirements of billions of people. The growing world population and global climate change make the challenges of providing adequate clean water, sanitation, and food ever more pressing. At the heart of effective irrigation lies the problem of lifting or pumping water. This handbook provides a detailed review of the water-lifting technologies available for irrigation, along with new information covering the provision of drinking water for humans and livestock. The book provides an overview of the entire spectrum of pumps and water lifting devices for small-scale applications and a basis for comparing and choosing between them. The main purpose is to provide a comprehensive single source of practical information for decision-makers concerned with the selection, sizing and procurement of water lifting systems and their power sources for both the supply of drinking water and for small-scale irrigation. Water Lifting Devices has long been the authority on the subject and this new third edition provides updated essential practical information for farmers, development workers, and all who need tomake informed choices about water lifting technologies. The study used the mechanical motion of playground seesaw as a means to produce pumping action. The study aimed to design a lowcost prototype energy contraption using playground seesaw using locally available and recycled materials. Pump is an innovative concept which pumps water from a bore well, a sump or a rain water harvesting tank. It uses playful energy of the children or the operators collectively to pump water. See-Saw pumps use the force lift technology to draw water from a well to an overhead tank above the ground level for storage and distribution. It does not require electric power. See-Saw pumps work on the same technology and use the reciprocating motion to move the valves of a water cylinder. The technology below the ground is same as the hand pump technology, hence making it very easy to maintain at the village level.