DESIGN AND IMPLEMENTATION OF EGG HATCHERY FOR INDUSTRY

DESIGN AND IMPLEMENTATION OF EGG HATCHERY FOR INDUSTRY

Tamilvanan R¹, Prof.Dr.S.Rathinavel²,

¹ Department of Electronics and Instrumentation & Bharathiar University, Coimbatore 46, Tamil Nadu, India

² Department of Electronics and Instrumentation & Bharathiar University, Coimbatore 46, Tamil Nadu, India

---------------------------------------------------------------------***---------------------------------------------------------------------

Abstract - The project aims to design and development of the egg Hatcher. The process is done by studying the temperature and moisturizing humidity, ventilation, and rotation.  For the growth of an embryo, we need inappropriate two high and low moisturizing temperatures. For this, we are using a light bulb to provide the temperature. The egg wants to turn 3 times a day so we are using the rotation plate for the rotation purpose. The fan absorbs the air inside the incubator to maintain the humidity in all the situations in the process which is displayed on the LCD.A dc motor is used for rotation which is placed at the bottom so the egg will rotate and it will maintain a temperature at all sides. During the process, if the temperature is raised the egg chick will be weak and the egg embryo will be damaged .so to avoid the problem we placed a coolant for bringing to is a warm temperature which the egg needs. An integrated circuit is used which is a processor to control all element   is STM32F103 is the main controller and also perform control element to modify for egg hatching and system state