Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM24331
Volume:
7 |
7 |
Jul 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
With the use of the computational fluid dynamics (CFD) tool known as ANSYS software, the purpose of this study is to investigate and develop a vertical-axis wind turbine (VAWT) for low wind speed. The Savonius type of wind turbine was chosen for this simulation; however, certain of its components were altered in order to improve the performance of its rotation. The simulation will be set up by positioning the turbine so that it is in the center of the wind tunnel and giving it an initial wind speed of 6.5 meters per second. These data from the simulation are utilized to analyze the dynamics of the wind flow as well as the rotational speed of the turbine that was designed here. It was discovered that the angular velocity is 62.90 radians per second, with an aspect ratio of 1.0.
KEYWORDS
Publication Date
2/6/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
5
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...