Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM17937
Volume:
7 |
3 |
Mar 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
In this paper a D shaped substrate conformal patch antenna by coplanar waveguide(CPW)-FED is proposed for Radar applications. As it is a asymmetrical CPW fed antenna the design consists of D-shaped patch and ground plane of different lengths separated by a feedline on the same side of substrate .The antenna is designed with the material FR4_Epoxy substrate with dielectric constant 4.4 and thickness 1.59mm. As per the simulation results, the proposed antenna can resonate at frequencies 7.77GHz and 12.6GHz which are used for satellite communications. This antenna is simulated using HFSS (High Frequency Structure Simulation)software and the basic parameters of antenna such as return loss, radiation pattern, bandwidth are analysed.
KEYWORDS
Publication Date
4/2/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
2
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...