Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM51212
Volume:
9 |
7 |
Jul 2025
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The main aim of structural engineer is to design the structure for a safe, serviceable, durable and economical. The entire process of structural planning and design is required imaginations and sound knowledge. Analysis and design of G+10 storey residential building structure as per IS Code method. Analysis and design of entire structure have been completed by manual design and verifies using STAAD.PRO Software. All the drafting and detailing was done by using AutoCAD. In this project, the design of beam, column, slab, staircase, shear wall is calculated by “Limit State Method” using IS: 456-2000 code book. Different load active on the member are consider according to IS: 875-1987 (part 1, part 2) & IS: 1893-2005 for seismic load. Hence residential building is properly planned in accordance with Indian Standard Code of India.
KEYWORDS
Publication Date
5/6/2025
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
2
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...