Crossref DOIMemberCiteFactoropen accessissn
SJIF Impact Factor 8.659 | ISSN: 2582-3930
IJSREM Logo

International Journal of Scientific Research in Engineering and Management

(Gateway to Global Scholars - An International, Scholarly, Multi-Disciplinary, Open Access Journal)

Peer-Reviewed Journal Designed to Meet UGC's Quality Parameters

HomeCurrent IssuePast IssuesPay OnlineConferencesEditorial BoardAbout UsContact Us
IJSREM

Loading article...

Follow Us

  • Google Scholar
  • ResearchGate
  • Academia.edu
  • Mendeley
  • LinkedIn
  • Facebook
  • Instagram

Journal Policies

  • Peer Review Policy
  • Publication Ethics
  • Copyright Infringement
  • Refund & Cancellation Policy
  • Terms and Conditions
  • Privacy Policy

Journal Identifiers & Licenses

  • ISSN Verified: 2582-3930ISSN Verified: 2582-3930
  • Crossref DOI: 10.55041Crossref DOI: 10.55041
  • SJIF Ranking: 08.659SJIF Ranking: 08.659
  • Licensed under CC BY 4.0Licensed under CC BY 4.0
  • ISO Certification: 9001:2015ISO Certification: 9001:2015
  • Indexed & Cited In: Google ScholarIndexed & Cited In: Google Scholar

Contact Us

International Journal of Scientific Research in Engineering and Management (IJSREM)

#62/1, New No 7, 1st Cross, 2nd Main, Ganganagar, R T Nagar, Bangalore North, Bangalore, Karnataka, India – 560032
[email protected]+91 93911 67991
logos
logos
Working Hours

Mon – Sat: 9:00 AM – 6:00 PM

Sunday: 10:00 AM – 4:00 PM

+91 93911 67991

© 2026 IJSREM – International Journal of Scientific Research in Engineering and Management. This is an open-access journal. Articles are published under the Creative Commons Attribution (CC BY 4.0) License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

DisclaimerPrivacy PolicyTerms and Conditions
ArticlePeer ReviewedOpen AccessPlagiarism Passed
Paper ID:IJSREM68800

Development of Sustainable Flexible Pavements Using Recycled Plastic Waste for Improved Performance

Stream/Area:

-

Subject:

-

Paper ID:

IJSREM68800

Volume:

10 |

11 |

Nov 2026

Pages:

1-11

Publication Frequency:

Monthly (12 issues per year)

DOI
Digital Object Identifier
10.55041/IJSREM68800

License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.

Share this article:

Authors

SMR

SHAIK MAHAMMAD RASOOL

Civil Engineering

Sanketika Vidya Parishad Engineering College

Download Author Certificate

Mentors

DM

Dr.M. MADHURI

Associate Professor and Head, Department of Civil Engineering

Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India

Download Mentor Certificate

Author Services & Downloads

Full ArticlesAcceptance Certificate

Abstract

Recycled plastic waste and fly ash can improve flexible pavements while diverting waste from landfills and open burning. This study examines three applications across the pavement section: recycled PET fibre with fly ash to stabilise a clayey subgrade, shredded low-density polyethylene (LDPE) in bituminous concrete (BC) by the dry and wet processes, and fly ash coated with molten LDPE as a composite mineral filler. Adding 1.2% PET fibre and 15% fly ash raised the unsoaked and soaked CBR of the subgrade to 2.33 and 2.04 times those of the natural soil, increased shear strength by 45% and reduced the plasticity index by 31%. A plastic coat of 9% of the bitumen weight reduced the crushing value of aggregate from 18.2% to 10.7%, the impact value from 16.4% to 10.6% and Los Angeles abrasion from 15.6% to 9.1%, and eliminated water absorption and stripping. With VG-30 bitumen and 8.3% plastic, the dry process raised Marshall stability from 2012 kg to 2780 kg (+38.2%) against 2350 kg (+16.8%) for the wet process. With VG-10 bitumen, 9% plastic raised stability from 1534 kg to 2006 kg and the tensile strength ratio (TSR) from 81% to 99%. The composite filler raised TSR from 84.5% to 93.8% and the resilient modulus at 35 °C from 2900 MPa to 4400 MPa. The dry process saves about Rs 37,600 per kilometre of single-lane premix carpet and consumes about 760 kg of plastic waste.

KEYWORDS

Flexible pavement; Waste plastic; Dry process; PET fibre; Fly ash; Marshall stability; Tensile strength ratio; Resilient modulus

Cite This Article

SHAIK MAHAMMAD RASOOL, Dr.M. MADHURI, "Development of Sustainable Flexible Pavements Using Recycled Plastic Waste for Improved Performance," International Journal of Scientific Research in Engineering and Management, vol. 10, no. 11, pp. 1-11, Nov 2026. https://doi.org/10.55041/IJSREM68800

Full Article/Conclusion

1.      Adding 1.2% recycled PET fibre and 15% fly ash to a clayey subgrade raised the unsoaked and soaked CBR to 2.33 and 2.04 times those of the natural soil, increased shear strength by 45% and reduced the plasticity index by 31%; strength declined beyond 1.2% fibre. 2.      A plastic coat of 9% of the bitumen weight reduced the crushing, impact and Los Angeles abrasion values of aggregate by 35–42% and eliminated water absorption, soundness loss and stripping. 3.      The dry process outperformed the wet process: with VG-30 bitumen and 8.3% plastic it raised Marshall stability by 38.2% and ITS by 17.0%, against 16.8% and 4.7% for the wet process. 4.      The optimum plastic content was 8.3% of the bitumen weight for VG-30 and 9% for VG-10, close to the 6–8% of IRC:SP:98-2013; above about 9–11%, stability, tensile strength and TSR fell. At 9% plastic, VG-10 stability rose by 30.8% and TSR from 81% to 99%. 5.      Fly ash coated with 0.8% plastic as filler raised stability by 17.2%, TSR from 84.5% to 93.8% and the resilient modulus at 35 °C by 52%. 6.      The modified mixes met the stability, flow, air-void and VMA limits of MORTH, IRC:111-2009 and IRC:SP:98-2013. VFB and Marshall quotient were at or slightly beyond their upper limits, so the base mix design should be refined before field use. 7.      The dry process saves about Rs 37,600 per kilometre of single-lane premix carpet and uses about 760 kg of plastic waste. Field trial sections, fatigue and ageing tests, wheel-tracking tests, separate study of PET fibre and fly ash in the subgrade, and measurement of fumes and microplastic release are recommended for future work.

References

[1]                   J. N. La Macchia, A. Ben Ameur, D. Dalmazzo, J. Valentin, and O. Baglieri, "Experimental evaluation of high RAP bituminous mixtures modified with recycled waste plastics," Construction and Building Materials, vol. 506, Art. no. 144896, Jan. 2026, doi: 10.1016/j.conbuildmat.2025.144896. [2]                   D. X. Lu, M. Enfrin, H. Masood, et al., "Performance evaluation of post-consumer and post-industrial recycled plastics as binder modifier in asphalt mixes," International Journal of Pavement Research and Technology, vol. 19, pp. 663–676, 2026, doi: 10.1007/s42947-024-00482-4. [3]                   S. K. Shah, Y. Gao, and A. Abdelfatah, "Plastic-waste-modified asphalt for sustainable road infrastructure: A comprehensive review," Sustainability, vol. 17, no. 21, Art. no. 9832, Nov. 2025, doi: 10.3390/su17219832. [4]                   L. Yu, H. Kang, R. Li, J. Pei, and Y. Du, "A study on the environmental performance of an asphalt mixture modified with directly added waste plastic," Materials, vol. 18, no. 5, Art. no. 1168, Mar. 2025, doi: 10.3390/ma18051168. [5]                   I. Elnaml, J. Liu, L. Mohammad, H. Dylla, N. Wasiuddin, and S. Cooper, "Recycling waste plastics in asphalt mixture: Engineering performance and environmental assessment," Journal of Cleaner Production, vol. 453, Art. no. 142180, May 2024, doi: 10.1016/j.jclepro.2024.142180. [6]                   H. M. B. Miranda, D. Domingues, and M. J. Rato, "The influence of recycled plastics added via the dry process on the properties of bitumen and asphalt mixtures," Transportation Engineering, vol. 13, Art. no. 100197, 2023, doi: 10.1016/j.treng.2023.100197. [7]                   P. Jitsangiam, K. Nusit, P. Teeratitayangkul, G. P. Ong, and C. Thienchai, "Development of a modified Marshall mix design for hot-mix asphalt concrete mixed with recycled plastic based on dry mixing processes," Construction and Building Materials, vol. 404, Art. no. 133127, 2023, doi: 10.1016/j.conbuildmat.2023.133127. [8]                   B. Khalid and F. Alshawmar, "Exploring the feasibility of using recycled PET strips with palm leaf ash for sustainable soil stabilization," Sustainability, vol. 15, no. 18, Art. no. 13542, 2023, doi: 10.3390/su151813542. [9]                   L. You, Z. Long, Z. You, D. Ge, X. Yang, F. Xu, M. Hashemi, and A. Diab, "Review of recycling waste plastics in asphalt paving materials," Journal of Traffic and Transportation Engineering (English Edition), 2022, doi: 10.1016/j.jtte.2022.07.002. [10]                N. Mashaan, A. Chegenizadeh, and H. Nikraz, "Laboratory properties of waste PET plastic-modified asphalt mixes," Recycling, vol. 6, no. 3, Art. no. 49, 2021, doi: 10.3390/recycling6030049.

Editorial & Review Transparency

Publication Date

11/6/2026

Peer Review Type

Double-Blind Peer Review

Review Rounds: 2

Documents

Review Report (Confidential)
Copyright Form (Office)

Article Metrics & Impact

Article Views

1

Total views since publication

PDF Downloads

5

Total downloads since publication

Geographic Reach

5

Indexing, Archiving & Preservation

Google Scholar
Academia
ResearchGate
Crossref
SSRN
Semantic Scholar
Thomson Reuters
WorldCat
Mendeley
OpenAlex
EBSCO
Zenodo

Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.

Ethics, Compliance & Transparency

Plagiarism Screening

This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.

Conflict of Interest

The authors declare no conflict of interest related to this research work.

Funding Information

No funding information available for this research.

Similar & Recommended Articles

Similar Articles by Topic

Related research in the same subject area

Loading similar articles...