Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68938
Volume:
10 |
11 |
Nov 2026
Pages:
1-9
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Department of Civil Engineering
Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India
Department of Civil Engineering
Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India
This study compares the lateral response of a G+10 reinforced-concrete residential building incorporating a central lift/staircase shear-wall core under earthquake and wind loading. The analytical configuration has a 24 m × 18 m plan, a total height of 33.6 m, M30 concrete and Fe500 reinforcement. The adopted numerical dataset gives a seismic base shear of 693 kN and an assumed wind base shear of 820 kN for a basic wind speed of 44 m/s. The maximum roof displacements are 72 mm under earthquake loading and 56 mm under wind loading; the corresponding reported maximum storey drifts are 13 mm and 9 mm. Wind produces larger reported beam and column bending moments, shear-wall shear and overturning moment, whereas earthquake loading governs roof displacement, drift and maximum column axial force. An illustrative frame-only comparison indicates reductions of 43.8% and 40.4% in earthquake- and wind-induced roof displacement, respectively, when shear walls are included. These values must be interpreted cautiously: the geometry and wind speed are assumed, several response quantities are manual analytical equivalents, and the available documentation records errors in the STAAD.Pro model. The results are therefore preliminary and are not presented as verified finite-element outputs. The study identifies the response trends indicated by the adopted dataset and the additional modelling and code checks required for reliable design conclusions.
KEYWORDS
For the assumed G+10 building, the adopted seismic base shear is 693 kN and the assumed wind base shear is 820 kN; the wind value is approximately 18.3% higher. The adopted roof displacements are 72 mm under earthquake loading and 56 mm under wind loading. The tabulated maximum storey drifts are 13 mm and 9 mm, respectively, although the final wind-storey drift requires correction because the displacement difference is 10 mm. Wind loading produces the larger reported beam moment, column moment, shear-wall shear and wall overturning moment, whereas earthquake loading produces the larger reported column axial force. The illustrative frame-only comparison indicates potential reductions of approximately 40–44% in roof displacement and 40–41% in maximum storey drift when the shear-wall core is included. These percentages remain unverified because the paired model outputs are not available. No single load case governs every response quantity in the adopted dataset. Both seismic and wind actions must therefore be considered when identifying member design forces and serviceability demands. The numerical results are preliminary. The building dimensions and basic wind speed are assumed, and the available record states that the STAAD.Pro model was producing errors. The response values must not be represented as verified software outputs until the analytical model and code checks are completed.
[1] Bureau of Indian Standards, IS 1893 (Part 1):2016, Criteria for Earthquake Resistant Design of Structures—Part 1: General Provisions and Buildings, New Delhi, India. [2] Bureau of Indian Standards, IS 875 (Part 1):1987, Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures—Dead Loads, New Delhi, India. [3] Bureau of Indian Standards, IS 875 (Part 2):1987, Code of Practice for Design Loads—Imposed Loads, New Delhi, India. [4] Bureau of Indian Standards, IS 875 (Part 3):2015, Design Loads (Other than Earthquake) for Buildings and Structures—Wind Loads, New Delhi, India. [5] Bureau of Indian Standards, IS 456:2000, Plain and Reinforced Concrete—Code of Practice, New Delhi, India. [6] Bureau of Indian Standards, IS 13920:2016, Ductile Design and Detailing of Reinforced Concrete Structures Subjected to Seismic Forces, New Delhi, India. [7] Applied Technology Council, FEMA 356, Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Washington, DC, 2000. [8] Federal Emergency Management Agency, HAZUS-MH MR5, Technical Manual, Washington, DC, 2010. [9] S. Otani, “Inelastic analysis of RC frame structures,” Journal of the Structural Division, ASCE, 1974. [10] M. S. Medhekar and S. K. Jain, “Seismic behaviour, design and detailing of RC shear walls,” Indian Concrete Journal, 1993. [11] Q. Zhao and A. Astanesh-Asl, “Cyclic behavior of traditional and innovative steel plate shear walls,” Journal of Structural Engineering, ASCE, 2007. [12] D. Dan et al., “Experimental and numerical study of steel-concrete composite shear walls,” 2011. [13] V. H. Akansel, A. Yakut and P. Gülkan, “Fragility of shear wall buildings with torsional irregularity,” 2012. [14] V. Vamvatsikos and C. A. Cornell, “Incremental dynamic analysis,” Earthquake Engineering & Structural Dynamics, vol. 31, pp. 491–514, 2002. [15] Bentley Systems, STAAD.Pro CONNECT Edition, Technical Reference and Analysis Documentation.
Publication Date
11/13/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
1
Total views since publication
PDF Downloads
5
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...