Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM69313
Volume:
10 |
11 |
Nov 2026
Pages:
1-6
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Civil Engineering
Acharya Institute of Technology, Bengaluru
Civil Engineering
Acharya Institute of Technology, Bengaluru
Civil Engineering
Acharya Institute of Technology, Bengaluru
Civil Engineering
Acharya Institute of Technology, Bengaluru
Civil Engineering
Acharya Institute of Technology, Bengaluru
Pervious concrete (PC) drains storm water through an interconnected pore network, but the high void content lowers its strength. This study examines the combined effect of coarse aggregate gradation and fly ash (FA) replacement on the mechanical and hydraulic properties of PC. Three single-sized crushed aggregate gradations (M1: 16–12.5 mm, M2: 12.5–10 mm, M3: 10–4.75 mm) were combined with seven FA replacement levels (0–30% of cement by weight, in 5% steps), giving 21 mixes designed as per ACI 522R-10 for a target void content of 20% at a water–binder ratio of 0.35. The 28-day compressive, split tensile and flexural strengths, total porosity, and coefficient of permeability (constant-head and variable-head methods) were determined. The reference compressive strength increased from 16.24 to 17.58 MPa as aggregate size decreased. FA improved all three strengths up to 20% replacement in every gradation (compressive strength gain of 13.0–18.0%), with peak values of 19.97 MPa compressive strength (M2F20), 2.19 MPa split tensile strength and 3.57 MPa flexural strength (M3F20); strength fell at higher replacement. Porosity decreased with finer aggregate and higher FA content (25.71% for M1 to 14.03% for M3F30), and constant-head permeability decreased from 26.7 to 5.1 mm/min. Permeability was strongly related to porosity (R² = 0.86), whereas strength increased with decreasing porosity only up to 20% FA (R² = 0.93), beyond which binder dilution governed. Mix M2F20 gave the best balance (19.97 MPa, 18.71% porosity, 16.1 mm/min), while M1F20 retained the highest permeability among the 20% FA mixes.
KEYWORDS
1) Reducing aggregate size from 16–12.5 mm to 10– 4.75 mm increased the reference compressive strength from 16.24 to 17.58 MPa and decreased porosity (25.71 to 21.38%) and constant-head permeability (26.7 to 18.5 mm/min). 2) Replacing cement with FA up to 20% improved compressive (13.0–18.0%), split tensile (21.7–28.0%) and flexural (8.9–18.6%) strengths in all gradations. The highest compressive strength was 19.97 MPa (M2F20); the highest split tensile and flexural strengths were 2.19 and 3.57 MPa (M3F20). Beyond 20% FA the strengths decreased. 3) Porosity fell steadily with FA content (26.8–34.4% reduction at 30% FA), and permeability fell by 34–72% (constant head) and 42–87% (variable head), most sharply for the finest gradation. M3F30 (14.03% porosity, 5.1 mm/min) is too dense for drainage use. 4) Permeability was strongly related to porosity (R2 = 0.86). Strength increased with decreasing porosity only for FA ≤ 20% (R2 = 0.93); above 20% FA, binder dilution outweighed the benefit of lower porosity. 5) M2F20 offers the best balance of strength and permeability (19.97 MPa, 18.71% porosity, 16.1 mm/min), and M1F20 is suitable where higher permeability is required. Both are suitable for parking areas, footpaths and light-traffic pavements, and show that FA can replace 20% of cement in PC while improving performance. 6) Further work should cover additional curing ages, FA contents between 20 and 30%, durability (freeze–thaw, abrasion, clogging), pore-structure characterisation and performance under repeated loading.
[1] ACI Committee 522, —Report on pervious concrete,‖ ACI 522R-10, American Concrete Institute, Farmington Hills, MI, USA, 2010. [2] P. D. Tennis, M. L. Leming, and D. J. Akers, Pervious Concrete Pavements. Skokie, IL, USA: Portland Cement Association, 2004. [3] N. Obla, —Pervious concrete—An overview,‖ Indian Concrete Journal, vol. 84, no. 8, 2010. [4] N. Ghafoori and S. Dutta, —Building and nonpavement applications of no-fines concrete,‖ Journal of Materials in Civil Engineering, vol. 7, no. 4, pp. 286–289, 1995. [5] P. Chindaprasirt, S. Hatanaka, T. Chareerat, N. Mishima, and Y. Yuasa, —Cement paste characteristics and porous concrete properties,‖ Construction and Building Materials, vol. 22, no. 5, pp. 894–901, 2008. [6] O. Deo and N. Neithalath, —Compressive response of pervious concretes proportioned for desired porosities,‖ Construction and Building Materials, vol. 25, no. 11, pp. 4181–4189, 2011. [7] C. Lian and Y. Zhuge, —Optimum mix design of enhanced permeable concrete—An experimental investigation,‖ Construction and Building Materials, vol. 24, no. 12, pp. 2664–2671, 2010. [8] B. Huang, H. Wu, X. Shu, and E. G. Burdette, —Laboratory evaluation of permeability and strength of polymer-modified pervious concrete,‖ Construction and Building Materials, vol. 24, no. 5, pp. 818–823, 2010. [9] F. Montes and L. M. Haselbach, —Measuring hydraulic conductivity in pervious concrete,‖ Environmental Engineering Science, vol. 23, no. 6, pp. 960–969, 2006. [10] M. S. Sumanasooriya and N. Neithalath, —Stereology- and morphology-based pore structure descriptors of enhanced porosity pervious concretes,‖ ACI Materials Journal, vol. 106, no. 5, pp. 429–438, 2009.
Publication Date
11/21/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
2
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...