Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM35614
Volume:
8 |
6 |
Jun 2024
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
An evaluation of the physical and engineering properties of modified binders was conducted in this paper, namely Crumb Rubber Modified Bitumen (CRMB – 55 grade & CRMB – 60 grade) containing cement as a mineral filler of 2 % and varying binder contents between 4% and 6% for determining the Optimum Binder Content (OBC) for aggregates of nominal size 13.2 mm in Grade-II. As a result of varying stress levels from 10% to 40%, the specimens have been cast for indirect tensile strength (ITS), moisture susceptibility, and fatigue cycles’ estimation.
KEYWORDS
Publication Date
8/5/2024
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
0
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...