Crossref DOIMemberCiteFactoropen accessissn
SJIF Impact Factor 8.659 | ISSN: 2582-3930
IJSREM Logo

International Journal of Scientific Research in Engineering and Management

(Gateway to Global Scholars - An International, Scholarly, Multi-Disciplinary, Open Access Journal)

Peer-Reviewed Journal Designed to Meet UGC's Quality Parameters

HomeCurrent IssuePast IssuesPay OnlineConferencesEditorial BoardAbout UsContact Us
IJSREM

Loading article...

Follow Us

  • Google Scholar
  • ResearchGate
  • Academia.edu
  • Mendeley
  • LinkedIn
  • Facebook
  • Instagram

Journal Policies

  • Peer Review Policy
  • Publication Ethics
  • Copyright Infringement
  • Refund & Cancellation Policy
  • Terms and Conditions
  • Privacy Policy

Journal Identifiers & Licenses

  • ISSN Verified: 2582-3930ISSN Verified: 2582-3930
  • Crossref DOI: 10.55041Crossref DOI: 10.55041
  • SJIF Ranking: 08.659SJIF Ranking: 08.659
  • Licensed under CC BY 4.0Licensed under CC BY 4.0
  • ISO Certification: 9001:2015ISO Certification: 9001:2015
  • Indexed & Cited In: Google ScholarIndexed & Cited In: Google Scholar

Contact Us

International Journal of Scientific Research in Engineering and Management (IJSREM)

#62/1, New No 7, 1st Cross, 2nd Main, Ganganagar, R T Nagar, Bangalore North, Bangalore, Karnataka, India – 560032
[email protected]+91 93911 67991
logos
logos
Working Hours

Mon – Sat: 9:00 AM – 6:00 PM

Sunday: 10:00 AM – 4:00 PM

+91 93911 67991

© 2026 IJSREM – International Journal of Scientific Research in Engineering and Management. This is an open-access journal. Articles are published under the Creative Commons Attribution (CC BY 4.0) License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

DisclaimerPrivacy PolicyTerms and Conditions
ArticlePeer ReviewedOpen AccessPlagiarism Passed
Paper ID:IJSREM68945

EXPERIMENTAL EVALUATION OF FATIGUE CRACKING BEHAVIOR IN BITUMINOUS PAVEMENTS UNDER REPEATED LOADING CONDITIONS

Stream/Area:

-

Subject:

-

Paper ID:

IJSREM68945

Volume:

10 |

11 |

Nov 2026

Pages:

1-8

Publication Frequency:

Monthly (12 issues per year)

DOI
Digital Object Identifier
10.55041/IJSREM68945

License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.

Share this article:

Authors

SC

SIMHACHALAM CHITTIBONU

Department of Civil Engineering

Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India

Download Author Certificate

Mentors

VHK

V. HEMANTH KUMAR

Department of Civil Engineering

Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India

Download Mentor Certificate

Author Services & Downloads

Full ArticlesAcceptance Certificate

Abstract

Fatigue cracking is a major distress mechanism in flexible pavements subjected to repeated traffic loading. The fatigue response of bituminous mixtures depends not only on binder characteristics but also on temperature, strain amplitude, loading sequence and the rest period between successive load applications. This study compares the fatigue performance of bituminous concrete Grade-II mixtures prepared with unmodified VG40 bitumen, crumb-rubber-modified bitumen (CRMB60) and polymer-modified bitumen (PMB40). Four-point beam bending tests were conducted at 0°C and 20°C under strain-controlled loading at 400, 600 and 800 microstrains and 10 Hz. Three loading protocols were considered: continuous loading without rest, loading with a 0.9 s rest period, and a simulated multi-axle sequence comprising one loading pulse followed by a rest interval and two successive pulses followed by another rest interval. Fatigue life was interpreted using stiffness reduction, AASHTO T321, ASTM D8237, ratio of dissipated energy change (RDEC) and energy-ratio approaches, subject to the suitability of each method for the loading protocol. Under continuous loading, CRMB60 generally showed improved fatigue response at higher strain levels, whereas PMB40 performed particularly well under selected low-temperature and low-strain conditions. Under multi-axle loading, the energy-ratio method indicated consistently strong performance of PMB40 relative to VG40 and CRMB60. The report also observed stiffness recovery during rest periods for modified mixtures. The findings demonstrate that binder ranking is dependent on temperature, strain amplitude, loading history and fatigue-life post-processing method; therefore, no single binder can be declared universally superior under all conditions.

KEYWORDS

Fatigue cracking; bituminous concrete; VG40; CRMB60; PMB40; four-point bending; rest period; multi-axle loading; fatigue life.

Cite This Article

SIMHACHALAM CHITTIBONU, V. HEMANTH KUMAR, "EXPERIMENTAL EVALUATION OF FATIGUE CRACKING BEHAVIOR IN BITUMINOUS PAVEMENTS UNDER REPEATED LOADING CONDITIONS," International Journal of Scientific Research in Engineering and Management, vol. 10, no. 11, pp. 1-8, Nov 2026. https://doi.org/10.55041/IJSREM68945

Full Article/Conclusion

1.      The fatigue response of bituminous concrete mixtures prepared with VG40, CRMB60 and PMB40 was evaluated using four-point bending at 0°C and 20°C, at 400, 600 and 800 microstrains. 2.      Under continuous loading, CRMB60 generally showed superior fatigue life at 20°C across the tested strain levels when evaluated using the 50% stiffness-reduction criterion. At 0°C and 400 microstrains, PMB40 produced the highest fatigue life. 3.      The RDEC and energy-ratio methods produced rankings that differed in some cases from stiffness-based methods. This confirms that fatigue life is dependent on the post-processing criterion, and the method must be reported with the result. 4.      The project report qualitatively observed a lower stiffness-reduction rate and better recovery during rest periods for CRMB60 and PMB40 than for VG40. The report also states that fatigue life improved when rest periods were introduced; however, the numerical rest-period results chapter is absent from the supplied PDF and no quantitative improvement is claimed here. 5.      Under multi-axle loading, the energy-ratio method indicated that PMB40 performed best at 20°C for all three strain amplitudes. At 0°C, the leading binder depended on strain amplitude: VG40 at 400 and 800 microstrains and PMB40 at 600 microstrains. 6.      The normalized-modulus method also indicated strong PMB40 performance at 20°C under multi-axle loading. However, the report cautions that peak-based normalized-modulus and Weibull approaches may be unsuitable or inconclusive for some multi-axle conditions involving rest intervals. 7.      Overall, modified binders improved fatigue response in several test conditions, but neither CRMB60 nor PMB40 was universally superior. The preferred binder depends on temperature, strain level, loading sequence and fatigue-life evaluation method.

References

[1] H. Cheng, J. Liu, L. Sun, L. Liu, and Y. Zhang, “Fatigue behaviours of asphalt mixture at different temperatures in four-point bending and indirect tensile fatigue tests,” Construction and Building Materials, vol. 273, Art. no. 121675, 2021, doi: 10.1016/j.conbuildmat.2020.121675. [2] H. Xiang, W. Zhang, P. Liu, and Z. He, “Fatigue-healing performance evaluation of asphalt mixture using four-point bending test,” Materials and Structures, vol. 53, no. 3, Art. no. 47, 2020, doi: 10.1617/s11527-020-01482-z. [3] H. Xiang, L. Chen, W. Zhang, P. Liu, and Z. He, “Effect of healing conditions on fatigue-healing of asphalt binder and asphalt mixture,” Journal of Materials in Civil Engineering, vol. 32, no. 5, 2020, doi: 10.1061/(ASCE)MT.1943-5533.0003129. [4] J. Muthulingam and P. Rekha, “Effect of rest period on the fatigue characteristics of unmodified and modified bitumen,” International Journal of Pavement Research and Technology, vol. 18, no. 1, 2024, doi: 10.1007/s42947-023-00413-9. [5] V. B. Nguyen, “Evaluation of fatigue behaviour of bituminous mixtures using a 4-point bending test,” Journal of Materials and Engineering Structures, vol. 11, pp. 223–232, 2024. [6] Y. Meng, D. Liu, H. Rong, and X. Yang, “Review and prospect of four-point bending fatigue test of asphalt mixture,” Journal of Road Engineering, vol. 4, no. 4, pp. 446–467, 2024, doi: 10.1016/j.jreng.2023.05.004. [7] J. Houlík, J. Valentin, and V. Nežerka, “Predicting the fatigue life of asphalt concrete using neural networks,” arXiv preprint, arXiv:2406.01523, 2024. [8] B. Zhang and M. Jing, “Evaluation of fatigue performance of asphalt materials based on their relaxation behavior,” Scientific Reports, vol. 15, Art. no. 1274, 2025, doi: 10.1038/s41598-025-85583-1. [9] J. Valente de Liz, B. S. Barra, A. Mikowski, G. B. Hughes, and A. Ferreira, “Fatigue testing in asphalt mixes: Emerging trends and findings from an integrated literature review,” Applied Sciences, vol. 15, no. 18, Art. no. 10220, 2025, doi: 10.3390/app151810220. [10] G. Loprencipe, L. Moretti, and M. Saltaren Daniel, “Fatigue resistance of RAP-modified asphalt mixes versus conventional mixes using the indirect tensile test: A systematic review,” Designs, vol. 9, no. 5, Art. no. 104, 2025, doi: 10.3390/designs9050104.

Editorial & Review Transparency

Publication Date

11/13/2026

Peer Review Type

Double-Blind Peer Review

Review Rounds: 2

Documents

Review Report (Confidential)
Copyright Form (Office)

Article Metrics & Impact

Article Views

0

Total views since publication

PDF Downloads

3

Total downloads since publication

Geographic Reach

5

Indexing, Archiving & Preservation

Google Scholar
Academia
ResearchGate
Crossref
SSRN
Semantic Scholar
Thomson Reuters
WorldCat
Mendeley
OpenAlex
EBSCO
Zenodo

Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.

Ethics, Compliance & Transparency

Plagiarism Screening

This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.

Conflict of Interest

The authors declare no conflict of interest related to this research work.

Funding Information

No funding information available for this research.

Similar & Recommended Articles

Similar Articles by Topic

Related research in the same subject area

Loading similar articles...