Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68934
Volume:
10 |
11 |
Nov 2026
Pages:
1-6
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Department of Civil Engineering
Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India
Department of Civil Engineering
Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India
This study experimentally evaluates ambient-cured, steel-fibre-reinforced geopolymer concrete incorporating fly ash, ground-granulated blast-furnace slag (GGBS) and metakaolin. Seven mixtures comprising six geopolymer binder combinations and an ordinary Portland cement (OPC) reference were considered at sodium hydroxide concentrations of 10, 12 and 14 M, a sodium silicate-to-sodium hydroxide mass ratio of 2.5 and an alkaline liquid-to-binder ratio of 0.40. Steel-fibre volume fractions ranged from 0 to 1.5%. The ternary mixture containing 60% fly ash, 25% GGBS and 15% metakaolin (M5) achieved the highest reported compressive strengths: 62.45 MPa at 28 days and 69.26 MPa at 90 days, using 14 M NaOH and 1.5% steel fibres. The same mixture achieved split tensile and flexural strengths of 5.69 and 8.46 MPa, respectively, at 28 days. Water absorption, sulphuric-acid exposure, sodium-sulphate exposure, rapid chloride permeability and ultrasonic pulse velocity were also evaluated. The results indicate favourable mechanical performance for the M5 ternary blend within the investigated matrix. However, inconsistencies in the strength and UPV datasets, durability calculations and supporting statistical information require resolution before the numerical findings can be treated as definitive.
KEYWORDS
The experimental results indicate that fly ash–GGBS–metakaolin ternary binders combined with steel fibres can produce ambient-cured geopolymer concrete with substantial compressive, split tensile and flexural strengths. Among the investigated mixtures, M5 containing 60% fly ash, 25% GGBS and 15% metakaolin achieved the highest stated mechanical strengths at 14 M NaOH and 1.5% steel fibres: 62.45 MPa compressive strength at 28 days and 69.26 MPa at 90 days, together with split tensile and flexural strengths of 5.69 and 8.46 MPa at 28 days. The reported water-absorption, acid-exposure, sulphate-exposure, RCPT and UPV results suggest potential durability-related benefits for selected ternary geopolymer mixtures. However, inconsistencies in the strength values, regression equation, durability calculations and supporting statistical information limit the certainty of these comparisons. Verification of the original measurements, correction of the affected tables, reporting of replicate statistics and documentation of any microstructural or life-cycle assessment methods are necessary before definitive conclusions are drawn.
[1] J. Davidovits, “Geopolymers of the first generation: silica-process,” 1988. [2] K. Srinivas Reddy and S. Bala Murugan, “A Study on Strength Properties and Cost Analysis of Industrial Byproduct-Based Ternary Blended Geopolymer Concrete,” Lecture Notes on Multidisciplinary Industrial Engineering, Springer, 2020, pp. 95–106, doi: 10.1007/978-981-13-7968-0_7. [3] J. Lehne and F. Preston, Making Concrete Change: Innovation in Low-carbon Cement and Concrete. Chatham House, 2018. [4] R. R. Bellum, K. Muniraj, and S. R. C. Madduru, “Exploration of mechanical and durability characteristics of fly ash-GGBFS based green geopolymer concrete,” SN Applied Sciences, vol. 2, no. 5, 2020, doi: 10.1007/s42452-020-2720-5. [5] M. F. M. Tahir et al., “Mechanical and durability analysis of fly ash based geopolymer with various compositions for rigid pavement applications,” Materials, vol. 15, no. 10, 2022, doi: 10.3390/ma15103458. [6] S. Nagajothi et al., “Durability studies on fly ash based geopolymer concrete incorporated with slag and alkali solutions,” Advances in Civil Engineering, vol. 2022, 2022, doi: 10.1155/2022/7196446. [7] R. R. Bellum et al., “Effect of slag on strength, durability and microstructural characteristics of fly ash-based geopolymer concrete,” Journal of Building Pathology and Rehabilitation, vol. 7, no. 1, 2022, doi: 10.1007/s41024-022-00163-4. [8] S. H. G. Mousavinejad and M. F. Gashti, “Effects of alkaline solution/binder and Na₂SiO₃/NaOH ratios on fracture properties and ductility of ambient-cured GGBFS based heavyweight geopolymer concrete,” Structures, vol. 32, pp. 2118–2129, 2021, doi: 10.1016/j.istruc.2021.04.008. [9] IS 1199:2018, Methods of Sampling and Analysis of Concrete, Bureau of Indian Standards, New Delhi, India. [10] IS 516:1959, Methods of Tests for Strength of Concrete, Bureau of Indian Standards, New Delhi, India.
Publication Date
11/13/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
3
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...