Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68801
Volume:
10 |
11 |
Nov 2026
Pages:
1-9
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Civil Engineering
Sanketika Vidya Parishad Engineering College
Associate Professor and Head, Department of Civil Engineering,
Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India
This study investigates high-performance concrete (HPC) of M60 target grade containing metakaolin (MK) and nano-silica (NS) as supplementary cementitious materials (SCM), reinforced with glass fibre (GF) and polypropylene (PP) fibre individually and in hybrid form, at water–binder (w/b) ratios of 0.30 and 0.45. Cement was replaced by 0–30% MK and 0–3% NS, and the optimum levels of 10% MK and 2% NS were used in eighteen optimised mixes with 1% GF and 0.3% PP fibre. Workability, compressive, split tensile and flexural strength at 7, 14, 28 and 90 days, and resistance to 2% HCl and magnesium sulphate were evaluated. The blend of 10% MK and 2% NS raised the 28-day compressive strength by 31.5% at 0.30 w/b. Adding GF to the blended mix gave the highest strengths: 102 MPa in compression, 7.1 MPa in split tension and 9.8 MPa in flexure at 28 days, and 127 MPa in compression at 90 days. Hybrid GF + PP reinforcement gave smaller strength gains than the single fibres, because the fibres bundled and dispersed unevenly. It did, however, give the best durability: the hybrid mix at 0.30 w/b lost only 4.2% of its strength after 90 days in acid and 6.3% in sulphate, against 12.9% and 16.2% for the control. Fibres reduced workability, with compaction factors falling from 0.85–0.90 to 0.71–0.79.
KEYWORDS
1. The optimum SCM levels were 10% metakaolin and 2% nano-silica. Their blend increased the 28-day compressive strength of HPC by 31.5% at 0.30 w/b, and the blended mix reached 117 MPa at 90 days. 2. Adding 1% glass fibre to the blended mix gave the highest strengths: 102 MPa in compression, 7.1 MPa in split tension and 9.8 MPa in flexure at 28 days (39.7%, 42% and 53% above the control), and 127 MPa in compression at 90 days. 3. Fibres were effective only in the dense SCM matrix; added to plain HPC they gave small compressive gains and no gain in flexure. 4. Hybrid GF + PP fibres gave smaller strength gains than single fibres, as excess fibre bundled and dispersed unevenly, and they reduced the compaction factor to 0.71–0.73. 5. The hybrid mix at 0.30 w/b showed the best durability, losing only 4.2% of its compressive strength after 90 days in 2% HCl and 6.3% in magnesium sulphate, against 12.9% and 16.2% for the control. Sulphate attack was more severe than acid attack, and losses increased with w/b ratio. 6. For maximum strength, HPC with 10% MK, 2% NS and 1% glass fibre is recommended; for aggressive chemical environments, the hybrid GF + PP mix at 0.30 w/b is preferable. Future work should examine metallic and other non-metallic fibres, fibre geometry, long-term durability such as freeze–thaw and carbonation, elevated-temperature behaviour and fracture properties.
[1] N. Praseetha, P. Kaythry, and P. Sangeetha, "AI-driven sustainable strength prediction and experimental evaluation of high-performance fiber-reinforced concrete incorporating metakaolin," Scientific Reports, vol. 16, Art. no. 13614, 2026, doi: 10.1038/s41598-026-41115-z. [2] P. Smarzewski and K. Błaszczyk, "Combined influence of polymeric and mineral fibres on fresh-state performance and fracture properties of high-performance self-compacting concrete," Scientific Reports, vol. 16, Art. no. 12998, 2026, doi: 10.1038/s41598-026-41949-7. [3] M. Vadivel, G. Selinaruby, R. Padmapriya, et al., "Experimental research on mechanical and microstructural characteristics of hybrid fiber reinforced concrete (HFRC)," Scientific Reports, vol. 15, Art. no. 43189, 2025, doi: 10.1038/s41598-025-23963-3. [4] N. Raveendran and V. Krishnan, "Engineering performance and environmental assessment of sustainable concrete incorporating nano silica and metakaolin as cementitious materials," Scientific Reports, vol. 15, Art. no. 1482, 2025, doi: 10.1038/s41598-025-85358-8. [5] J. Ma, H. Yuan, J. Zhang, and P. Zhang, "Enhancing concrete performance: A comprehensive review of hybrid fiber reinforced concrete," Structures, vol. 64, Art. no. 106560, 2024, doi: 10.1016/j.istruc.2024.106560. [6] Adanagouda, H. M. Somasekharaiah, M. S. Shobha, and H. M. Mallikarjuna, "Combined effect of metakaolin and hybrid fibers on the strength properties of high performance concrete," Materials Today: Proceedings, vol. 49, part 5, pp. 1527–1536, 2022, doi: 10.1016/j.matpr.2021.07.310. [7] S. Patil, H. M. Somasekharaiah, H. S. Rao, and V. G. Ghorpade, "Behaviour of fly ash and metakaolin based composite fiber (glass and polypropylene) reinforced high performance concrete under acid attack," Civil Engineering and Architecture, vol. 9, no. 4, pp. 1026–1047, 2021, doi: 10.13189/cea.2021.090406. [8] S. Patil, H. M. Somasekharaiah, and H. S. Rao, "Evaluation of strength properties of fly ash and metakaolin based composite fiber (glass and polypropylene) reinforced high-performance concrete," International Journal of Engineering Trends and Technology, vol. 69, no. 4, pp. 188–203, 2021, doi: 10.14445/22315381/IJETT-V69I4P227. [9] S. Patil, H. M. Somasekharaiah, and H. S. Rao, "Chloride penetration resistance and behaviour under acid attack of metakaolin and silica fume based composite fiber (glass and polypropylene) reinforced high performance concrete," International Journal of Engineering Trends and Technology, vol. 69, no. 4, pp. 146–161, 2021, doi: 10.14445/22315381/IJETT-V69I4P222. [10] B. Sankar and P. Ramadoss, "Review on fiber hybridization in ternary blended high-performance concrete," Materials Today: Proceedings, vol. 45, part 6, pp. 4919–4924, 2021, doi: 10.1016/j.matpr.2021.01.366.
Publication Date
11/6/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
4
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...