Experimental Study of Recycled Aggregate, Fly Ash and Steel Fiber on Properties of Concrete

Experimental Study of Recycled Aggregate, Fly Ash and Steel Fiber on Properties of Concrete

     Prof. S.K. Gorde1                           Prof. G. P. Walhekar2             Prof. R D. Vikhe3

1. Head, Department of  Civil Engineering, P. Dr. V. Vikhe Patil Institute of Technology & Engineering      (Polytechnic), Loni, Pravara.

2. Lecturer, Department of  Civil Engineering, P. Dr. V. Vikhe Patil Institute of Technology & Engineering (Polytechnic), Loni, Pravara.

3. Lecturer, Department of Civil Engineering, P. Dr. V. Vikhe Patil Institute of Technology & Engineering (Polytechnic), Loni, Pravara.

Abstract: The use of recycled aggregates in concrete opens a whole new range of possibilities in the reuse of materials in the building industry. The utilization of recycled aggregates is a good solution to the problem of an excess of waste material, provided that the desired final product quality is reached.The use of recycled aggregate in concrete can be useful for environmental protection and economical terms recycled aggregates are the materials for the future.The work focuses on the possibilities of the recycled aggregate concrete as structural material with replacement level of 25%,50% and 75% byweight of concrete.

Fly ash is also used as a partial replacement of Portland cement with10, 20 & 30

% by weight of cement in order to improve the properties of  RAC. The use of fly ash replacement in Recycled Aggregate concrete (RAC) could improve compressive strength to be higher than that of concrete without fly ash at the same W/B ratio.The fly ash is an organic, non combustible residue of coal after burning in power plant.

The steel fiber are available imperforated, corrugated or with wide end for better bending.The volume fraction of the hook end steel fiber used in this study varied from 0.25%,0.5%a and 0.75

%.

Key words- Fly Ash, Recycled Aggregate, Recycled Concrete Aggregate, Steel Fiber, Water Cement Ratio.