EXPERIMENTAL STUDY ON BEHAVIOR OF RECYCLED AGGREGATE IN CONCRETE
M Nithiyanand., M.E., MISTE (Construction Engineering & Management)
Head at Department of Agricultural Engineering, K.S.R Polytechnic College, Tiruchengode, Namakkal Dt.
---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract - Concrete is one of the most widely used construction material in the world. Increase in population growth is leading to increase in various demands like cultivation, transportation, construction etc. Nowadays, there is a tremendous increase in the demand for construction works like residential buildings, bridges, dams, roads etc. and because of this increase in demand the availability of sources for concrete ingredients is getting difficult. Hence people are looking for alternative sources for the concrete ingredients in order to full fill their requirements. This dissertation work deals with the study of strength of concrete incorporating Recycled Aggregate concrete(R.A.C).The main objective of this investigation is to find out up to what percentage the Natural Coarse Aggregate(N.C.A) can be replaced by recycled coarse aggregate(R.C.A) in the concrete mix and to find out the extra quantity of cement to be added for each percentage replacement byR.C.A. to achieve its target mean strength. In this ongoing project work it is concentrated only on the use of R.C.A. A series of tests were carried out to determine the compressive strength, split tensile strength, flexural strength with and without recycled aggregates. Natural coarse aggregates in concrete were replaced with 0%, 20%, 40%, 60%, 80% and 100% of crushed concrete coarse aggregates. For the strength characteristics, the result showed a gradual decrease in compressive strength, split tensile strength, flexural strength and modulus of elasticity as the percentage of recycled aggregate is increased.
Key Words: Natural Coarse Aggregate, Recycled coarse aggregate, compressive strength, split tensile strength, flexural strength.
