Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM62488
Volume:
10 |
5 |
May 2026
Pages:
1-9
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
COMPUTER SCIENCE
SUSHANT UNIVERSITY
COMPUTER SCIENCE
SUSHANT UNIVERSITY
COMPUTER SCIENCE
SUSHANT UNIVERSITY
Fire detection systems are the most critical element of any building design these days. These days, reports offire occurrences arefrequent. In many instances, this could be the result ofpeople's carelessness. Take a look at afew locations, such as gas stations, snack stores, homes, andprimarily offices, etc. Every year, there are believed to be around ten thousandfire incidents. In this study, an automatic fire detection system using a sensor is introduced, taking all of these factors into account. Our suggested solution works differently from the current one, which uses afire sensor to detect the fire. The current systems have fire alarms that sound an alert when afire is discovered inside a certain area. The proposed system contains thefire alarm, Bread Board, Arduino in addition to that it sends a notification to our mobile and mail can be sent to the attached mail id which will be having the information of the accident-prone area, and also the information needed to alert the fire station about the incident.
KEYWORDS
[1] After several tests have been done towards our project, The Fire Alarm System has been able to be conducted according to the desired system. The system consists of two inputs, which are flame sensor and gas sensor. Starting off with the flame sensor, it detects the presence of the fire and it will send a signal to its output. In this case, the outputs are Piezo Buzzer . the buzzer will produce the sound after obtain the signal to aware the users about the presence of fire. The second input, which is the gas sensor is a component that measures presences of the gas, which is smoke in this case. The type of gas sensor we use for this project is MQ-2. This type of gas sensor able to detects butane, methane, LPG and smoke. This gas sensor is placed at this fire alarm system to enhance to safety when there are fires. When the situation occurs, it will send a signal to its output, which is the buzzer. This buzzer acts as an alarm that reminds the users to be aware of the situation. Certain tests, improvements and changes were done to achieve the results mentioned above. The sensors have been tested and it work well as intended. This project certainly can be a huge helping to the society to prevent the unwanted situation. This alarm system can implement Fire Alarm requirement to maintain the safety and eliminate hazard.
[1] After several tests have been done towards our project, The Fire Alarm System has been able to be conducted according to the desired system. The system consists of two inputs, which are flame sensor and gas sensor. Starting off with the flame sensor, it detects the presence of the fire and it will send a signal to its output. In this case, the outputs are Piezo Buzzer . the buzzer will produce the sound after obtain the signal to aware the users about the presence of fire. The second input, which is the gas sensor is a component that measures presences of the gas, which is smoke in this case. The type of gas sensor we use for this project is MQ-2. This type of gas sensor able to detects butane, methane, LPG and smoke. This gas sensor is placed at this fire alarm system to enhance to safety when there are fires. When the situation occurs, it will send a signal to its output, which is the buzzer. This buzzer acts as an alarm that reminds the users to be aware of the situation. Certain tests, improvements and changes were done to achieve the results mentioned above. The sensors have been tested and it work well as intended. This project certainly can be a huge helping to the society to prevent the unwanted situation. This alarm system can implement Fire Alarm requirement to maintain the safety and eliminate hazard.
Publication Date
5/4/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
9
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...