Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68615
Volume:
10 |
10 |
Oct 2026
Pages:
1-6
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Department of Science
The Bhopal School of Social Sciences
Department of Science
The Bhopal School of Social Sciences
Department of Science
The Bhopal School of Social Sciences
Department of Science
The Bhopal School of Social Sciences
The growing emphasis on sustainable and biodegradable materials has spurred the development of natural fiber-reinforced polymer composites. This study investigates the influence of sisal fiber reinforcement on the mechanical properties of low-density polyethylene (LDPE) matrix composites. Composites were fabricated using both untreated and alkali-treated (5% NaOH) sisal fibers at varying fiber loadings (e.g., 5%, 10%, and 15% by weight) via melt blending and compression molding techniques. The mechanical behaviour of the composites was evaluated through tensile, flexural, and impact strength tests in accordance with ASTM standards. Results indicated that NaOH treatment significantly enhanced the interfacial bonding between the sisal fibers and the LDPE matrix, leading to notable improvements in tensile and flexural properties compared to untreated fiber composites. The optimum fiber loading was identified at 10 wt%, beyond which mechanical performance declined due to poor fiber dispersion and possible agglomeration. Impact strength also followed a similar trend. The study confirms that alkali treatment effectively increases fiber surface roughness and improves mechanical interlocking, making sisal fiber-reinforced LDPE composites a viable and eco-friendly alternative for moderate load-bearing applications.
KEYWORDS
This study demonstrated that reinforcing LDPE with sisal fiber improves mechanical properties, especially when fibers are treated with NaOH. Alkali treatment enhanced tensile, flexural, and impact strengths by improving fiber–matrix adhesion and reducing moisture sensitivity. Water absorption studies showed that untreated composites suffered greater mechanical degradation due to fiber swelling and interface debonding, whereas treated composites maintained better structural integrity. Biodegradability assessment via soil burial indicated that sisal incorporation accelerated degradation compared to neat LDPE. Untreated composites degraded more rapidly due to higher cellulose exposure, while treated composites balanced mechanical performance with satisfactory environmental breakdown. In summary, alkali-treated LDPE–sisal fiber composites present a promising balance between mechanical strength and environmental sustainability. They offer enhanced durability during service life and improved degradation post-disposal, making them suitable candidates for eco-friendly applications such as agricultural films, packaging materials, and low-load structural components.
Alvarez, V., Vázquez, A., & Bernal, C. (2006). Effect of microstructure on the tensile and fracture properties of sisal fiber/starch-based composites. Journal of Composite Materials, 40(1), 21–35. https://doi.org/10.1177/0021998305046457 Chandrasekar, M., Ishak, M. R., Sapuan, S. M., Leman, Z., & Jawaid, M. (2017). A review on the characterisation of natural fibres and their composites after alkali treatment and water absorption. Plastics, Rubber and Composites, 46(3), 119–136. https://doi.org/10.1080/14658011.2017.1298550 Geethamma, V. G., Thomas Mathew, K., Lakshminarayanan, R., & Thomas, S. (1998). Composite of short coir fibres and natural rubber: Effect of chemical modification, loading and orientation of fibre. Polymer, 39(6–7), 1483–1491. https://doi.org/10.1016/S0032-3861(97)00345-5 Goda, K., & Cao, Y. (2007). Research and development of fully green composites reinforced with natural fibers. Journal of Solid Mechanics and Materials Engineering, 1(9), 1073–1084. https://doi.org/10.1299/jmmp.1.1073 Huang, X., & Netravali, A. (2007). Characterization of flax fiber reinforced soy protein resin-based green composites modified with nano-clay particles. Composites Science and Technology, 67(10), 2005–2014. https://doi.org/10.1016/j.compscitech.2006.12.004 Kim, J. T., & Netravali, A. N. (2010). Mechanical, thermal, and interfacial properties of green composites with ramie fiber and soy resins. Journal of Agricultural and Food Chemistry, 58(9), 5400–5407. https://doi.org/10.1021/jf904400w Kolpak, F. J., Weih, M., & Blackwell, J. (1978). Mercerization of cellulose: 1. Determination of the structure of mercerized cotton. Polymer, 19(2), 123–131. https://doi.org/10.1016/0032-3861(78)90036-0 Mohanty, A. K., Misra, M., & Drzal, L. T. (2002). Sustainable bio-composites from renewable resources: Opportunities and challenges in the green materials world. Journal of Polymers and the Environment, 10(1–2), 19–26. https://doi.org/10.1023/A:1021013921916 Prabhakaran, S., Krishnaraj, V., Hemashree, G., & Senthilkumar, M. (2022). Biodegradation behaviour of green composite sandwich made of flax and agglomerated cork. Composite Structures, 301, 116310. https://doi.org/10.1016/j.compstruct.2022.116310
Publication Date
11/13/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
1
Total views since publication
PDF Downloads
0
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...