Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM69094
Volume:
10 |
11 |
Nov 2026
Pages:
1-6
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.

Department of Electronics and Communication
Kalpataru Institute of Technology, Tiptur

Department of Electronics and Communication
Kalpataru Institute of Technology, Tiptur

Department of Electronics and Communication
Kalpataru Institute of Technology, Tiptur

Department of Electronics and Communication
Kalpataru Institute of Technology, Tiptur

Department of Electronics and Communication
Kalpataru Institute of Technology, Tiptur
Manual monitoring of soil moisture, climate and plant health in greenhouses is time-consuming, and most low-cost systems do not combine environmental automation with plant health analysis. This paper presents a low-cost Internet of Things (IoT) smart greenhouse in which an ESP32-CAM acts as the main controller, running the control logic, hosting a Wi-Fi web dashboard, streaming live video and capturing plant images. An Arduino Nano serves as a general-purpose input/output (GPIO) expander that interfaces temperature/humidity, soil-moisture and flame sensors, a 16×2 liquid crystal display (LCD), a buzzer, and a relay module driving a water pump and lighting, and exchanges data with the ESP32-CAM over a serial link. Captured images are sent to a Python/Flask server for artificial intelligence (AI)-based analysis of visible leaf symptoms. Test procedures were defined for every subsystem. On the prototype, Wi-Fi dashboard access, live camera streaming and AI-based analysis of a captured image were demonstrated, while sensor-data communication and soil-moisture interpretation were found to need correction and re-verification. The modular design provides an affordable foundation for greenhouse automation, with the AI output serving as decision support rather than a definitive diagnosis.
KEYWORDS
This paper presented an IoT smart greenhouse that unifies environmental monitoring, soil-moisture-based irrigation, fire alerting, a local LCD, a Wi-Fi web dashboard with live video, and AI-assisted plant health analysis, using an ESP32-CAM as the main controller, an Arduino Nano as a GPIO expander, and a Python/Flask server. The modular, low-cost design provides a practical foundation for more intelligent greenhouse management. Future scope includes more accurate sensors, larger plant-image datasets to improve disease identification and early detection, cloud storage of sensor and plant health records, and a mobile application with alerts for abnormal temperature, fire and soil moisture. A calibrated capacitive soil-moisture sensor with analogue output would allow more flexible irrigation control than digital WET/DRY detection, and automatic temperature control with a cooling fan, data logging, solar power and multi-section greenhouse expansion are further extensions. A systematic quantitative evaluation of the integrated prototype under different operating conditions is also planned.
[1] M. Hasan et al., “IoT-based smart fertigation scheduling and wireless microclimate monitoring for a greenhouse Dutch bucket hydroponic system,” Irrigation and Drainage, 2025. [2] D.-I. Săcăleanu, M.-G. Matache, Ș.-G. Roșu, B.-C. Florea, I.-P. Manciu, and L.-A. Perișoară, “IoT-enhanced decision support system for real-time greenhouse microclimate monitoring and control,” Technologies, 2024. [3] M. Iftikhar, I. A. Kandhro, N. Kausar, A. Kehar, M. Uddin, and A. Dandoush, “Plant disease management: A fine-tuned enhanced CNN approach with mobile app integration for early detection and classification,” Artificial Intelligence Review, 2024. [4] V. Thomopoulos, F. Tolis, T.-F. Blounas, D. Tsipianitis, and A. Kavga, “Application of fuzzy logic and IoT in a small-scale smart greenhouse system,” Smart Agricultural Technology, 2024. [5] T. A. Folorunso, O. Oshiga, J. A. Bala, and D. A. Ojogunwa, “Development of an Internet of Things based smart greenhouse,” International Journal of Computer Trends and Technology, 2024. [6] V. Tomar and N. Saroha, “IoT-enabled smart greenhouse: Real-time monitoring and automated control for efficient agriculture,” International Journal of Research and Review in Applied Science, Humanities, and Technology, 2024. [7] H. A. Méndez-Guzmán et al., “IoT-based monitoring system applied to aeroponics greenhouse,” Sensors, 2022. [8] C. A. Hernández-Morales, J. M. Luna-Rivera, and R. Perez-Jimenez, “Design and deployment of a practical IoT-based monitoring system for protected cultivations,” Computer Communications, 2022. [9] M. H. Saleem, S. Khanchi, J. Potgieter, and K. M. Arif, “Image-based plant disease identification by deep learning meta-architectures,” Plants, vol. 9, no. 11, Art. no. 1451, 2020. [10] W. Ding, M. Abdel-Basset, I. Alrashdi, and H. Hawash, “Next generation of computer vision for plant disease monitoring in precision agriculture: A contemporary survey, taxonomy, experiments, and future direction,” Information Sciences, 2024.
Publication Date
11/17/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...