Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68693
Volume:
10 |
11 |
Nov 2026
Pages:
1-4
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.

Electronics and Communication Engineering
Kalapataru Institute of Technology

Electronics and Communication Engineering
Kalapataru Institute of Technology

Electronics and Communication Engineering
Kalapataru Institute of Technology

Electronics and Communication Engineering
Kalapataru Institute of Technology

Electronics and Communication Engineering
Kalapataru Institute of Technology
People with physical disabilities may experience difficulties in controlling conventional mobility systems. This paper presents an IoT-based head-controlled smart assistive robot designed to support hands-free movement through head gestures. The system uses an MPU6050 sensor to detect head movements and an ESP32 microcontroller to process movement commands. Commands are transmitted wirelessly to a second ESP32 using ESP-NOW communication. The receiver controls the robot’s motors through an L298N motor driver. The robot supports forward, backward, left, and right movement. An HCSR04 ultrasonic sensor detects nearby obstacles, and the robot is configured to stop when an obstacle is detected within a threshold distance of 20 cm. A communication timeout mechanism provides an additional stopping condition when valid control commands are no longer received. The Blynk platform is used for monitoring system information. The proposed prototype integrates gesturebased control, wireless communication, obstacle detection, and fail-safe stopping.
KEYWORDS
This paper presents an IoT-based head-controlled smart assistive robot prototype that integrates head gesture sensing, ESP32 microcontrollers, ESP-NOW wireless communication, motor control, obstacle detection, and communication timeout protection. The MPU6050 provides the input for gesture-based commands, while the receiver controls the robot’s movement through an L298N motor driver. The robot supports forward, backward, left, and right movement. The HC-SR04 provides obstacle distance measurements, and the configured 20 cm threshold is used to trigger a stop. A 500 ms communication timeout provides an additional stopping condition when valid commands are not received. Blynk is included for monitoring system information. The proposed design provides a foundation for further research into hands-free robotic control. Physical testing and measured performance data are required to establish its reliability and suitability for specific assistive applications.
[1] InvenSense, MPU-6000 and MPU-6050 Product Specification. Available: https://invensense.tdk.com/ [2] Espressif Systems, ESP32 Series Datasheet. Available: https://www.espressif.com/ [3] Espressif Systems, ESP-NOW Documentation. Available: https://docs.espressif.com/ [4] SparkFun Electronics, HC-SR04 Ultrasonic Sensor Documentation. Available: https://www.sparkfun.com/ [5] STMicroelectronics, L298 Dual Full-Bridge Driver Datasheet. Available: https://www.st.com/ [6] Blynk, Blynk Platform Documentation. Available: https://docs.blynk.io/ [7] Espressif Systems, ESP-IDF Programming Guide. Available: https://docs.espressif.com/projects/esp-idf/ [8] NXP Semiconductors, I²C-Bus Specification and User Manual. Available: https://www.nxp.com/ [9] A. Jackowski, M. Gebhard, and R. Thietje, Head Motion and Head esture-Based Robot Control: A Usability Study, 2018. [10] N. Rudigkeit and M. Gebhard, AMiCUS—A Head Motion-Based Interface for Control of an Assistive Robot, 2019.
Publication Date
11/17/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
0
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...