Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM69153
Volume:
10 |
11 |
Nov 2026
Pages:
1-12
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.

Electronics and computer engineering
Aditya college of engineering and technology

Electronics and computer engineering
Aditya college of engineering and technology

Electronics and computer engineering
Aditya college of engineering and technology
Industrial electrical loads are exposed to overload, abnormal voltage and overheating. Conventional protection devices such as fuses and circuit breakers only disconnect the supply after a fault has occurred. They show no real-time readings, keep no record of the fault, and need a manual reset. This leads to damaged equipment, longer downtime and safety risks. The IoT-Based Real-Time Industrial Electrical Monitoring and Self-Healing System uses an ESP32 microcontroller as the main controller. A voltage sensormodule measures voltage, an ACS712 sensor measures current, and a DS18B20 sensor measures temperature. A 2-channel relay module switches two loads, which are selected by two toggle switches: Load 1 (motor) is the normal load and Load 2 (fan) is the fault load. A buzzer gives an audible alarm. The readings are shown on a 16x2 I2C LCD and sent over Wi-Fi to a web dashboard every 5 seconds. The normal load runs on its own without any fault. When the fault load is switched on while the normal load is running, the system treats it as an overload and sounds the buzzer. It lets both loads run for a short 1-second window to capture the peak current, records it as the trip current, and then switches both relays OFF. When the user turns one switch OFF, the system clears the trip and runs the remaining load again automatically, without any manual reset. This is the self-healing action. The system also cuts both loads and sounds the buzzer if the temperature rises above 50 °C, and restores them when it falls below 48 °C. The system gives a low-cost, wireless way to monitor, protect and recover electrical loads, and supports small-scale industrial automation and educational projects.
KEYWORDS
The IoT-Based Real-Time Industrial Electrical Monitoring and Self-Healing System is a low-cost system that combines measurement, automatic protection, automatic recovery and remote monitoring. The ESP32 reads the voltage, current and temperature sensors, controls the load relays and the buzzer, shows the readings on an LCD, and sends them to a web dashboard over Wi-Fi. When the fault load causes an overload, the system sounds the buzzer, captures the peak current, records it as the trip current and switches the loads OFF. When the overload is removed, it restores operation automatically. If the temperature goes above 50 °C, it cuts both loads and restarts them below 48 °C. This reduces downtime and the need for manual attention. Running the network task on a separate core keeps the protection fast and independent of Wi-Fi. The system shows how embedded systems, sensors, relay control and IoT communication can be integrated into a practical and affordable monitoring unit. In future work, it can be extended with AC voltage and power measurement, over-voltage and current limits, certificate-verified HTTPS, mobile alerts, data logging with graphs, and machine-learning-based predictive maintenance.
1. Espressif Systems, ESP32 Series Datasheet and ESP32 Technical Reference Manual, Espressif Systems, Shanghai, China. 2. Allegro MicroSystems, ACS712: Fully Integrated, Hall Effect-Based Linear Current Sensor IC (datasheet). 3. Maxim Integrated, DS18B20 Programmable Resolution 1-Wire Digital Thermometer (datasheet). 4. Arduino, Arduino IDE and Language Reference Documentation, arduino.cc. 5. Espressif Systems, Arduino-ESP32 Core and FreeRTOS Documentation.
Publication Date
11/18/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
0
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...