Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM17971
Volume:
7 |
3 |
Mar 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The proposed work presents the implementation and results of an environmental monitoring system that employs sensors for the temperature and humidity of the surrounding area. The system employs an Arduino UNO board, DHT22 sensor, and ESP8266 Wi-Fi module which transmits data to open IOT API service Things Board where it is analyzed and stored. The data updated from the implemented system can be accessible on the internet from anywhere in the world. The experimental results show the usefulness of the system.
KEYWORDS
Publication Date
7/2/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
5
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...