Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM60565
Volume:
10 |
4 |
April 2026
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
This paper presents the design and implementation of an IoT-enabled smart Battery Management System (BMS) for a 3S lithium-ion battery pack. The system employs three INA219 current/voltage sensors, SPDT relays, an ESP32 microcontroller, and a 16×2 LCD display to achieve real-time individual cell monitoring. Key battery parameters — voltage, current, State of Charge (SOC), and State of Health (SOH) — are computed for each cell and simultaneously displayed on a local LCD and a Wi-Fi hosted web dashboard. A fault detection mechanism identifies overvoltage, undervoltage, overcurrent, and cell imbalance conditions, triggering relay-based cell isolation and real-time alerts. The proposed system provides a low-cost, scalable, and practical solution for battery monitoring in Indian EV, solar storage, and UPS applications.
KEYWORDS
Publication Date
4/18/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
0
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...